Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin 2210F - Americas - PEI-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin 2210F - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
20% Glass fiber filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming. US FDA Food Contact compliant in recognized colors.

UL Yellow Card Link E121562-221093
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 6800 MPa ISO 527
항복강도 140 MPa ISO 527
항복변형률 2 % ISO 527
파단시 강도 140 MPa ISO 527
파단시 신율 2 % ISO 527
굴곡 계수 6500 MPa ISO 178
챠피 노치드 충격 강도, +23°C 8 kJ/m² ISO 179/1eA
아이조드 노치 충격 강도, +23°C, 4mm 5 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 5 kJ/m² ISO 180/1A
ASTM 데이터
인장탄성률 6890 MPa ASTM D 638
항복강도 139 MPa ASTM D 638
파단시 강도 140 MPa ASTM D 638
항복변형률 2 % ASTM D 638
굴곡 계수 6890 MPa ASTM D 790
Izod충격강도, 1/8 in 475 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, B 212 °C ISO 306
비카트 연화 온도, 120°C/h 50N 218 °C ISO 306
두께 H인 제품의 난연성 V-0 class IEC 60695-11-10
테스트 두께 0.4 mm -
두께가 h인 제품의 난연성 등급 5V 5VA class IEC 60695-11-20
테스트 두께 1.9 mm -
ASTM 데이터
비카트 연화 온도 226 °C ASTM D 1525
기타 특성값단위시험규격
물에서의 흡수성 1 % ISO 62와 유사
조건에서의 흡습성 0.55 % ISO 62와 유사
밀도 1420 kg/m³ ISO 1183
특징
생산 공정
사출 성형
Certifications
Food contact, Food approval FDA 21 CFR
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.