Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TIPOLEN FC 243-51 - (PE-LD) - MOL Petrochemicals Co. Ltd.

Material Data Center offers the following functions for TIPOLEN FC 243-51:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tipolen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성 - 기계적 성질 (필름) - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 2 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
쇼어 D 경도 48 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, A 94 °C ISO 306
광학 특성값단위시험규격
ISO Data
탁도 10 - ISO 14782
기타 특성값단위시험규격
밀도 922 kg/m³ ISO 1183
기계적 성질 (필름) 값단위시험규격
ISO 데이터
최대강도, parallel 24 MPa ISO 527-3
최대강도, 평행 15 MPa ISO 527-3
최대변형율, 평행 250 % ISO 527-3
최대변형율, 수직 530 % ISO 527-3
다트 낙하 충격, 방법 A 80 g ISO 7765-1
압출 유형 blown - -
시편두께 0.04 mm -
Processing Recommendation Extrusion값단위시험규격
용융수지온도 160 - 200 °C -
특징
생산 공정
Blown Film Extrusion, 필름 압출
인도 유형
펠렛 (입자,알갱이)
특성
Foamable
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, RoHS
응용
전기 및 전자 , 범용, 의료, 포장, 장난감
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.