Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TEREZ® POM 8005 GF 25 - POM-GF25 - Ter Plastics

Material Data Center offers the following functions for TEREZ® POM 8005 GF 25:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Terez datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
제품 설명서
25 % reinforced glass fibre standard grade.
Housing, functional and supporting elements at elevated temperature.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 흐름성, MFI 4.5 g/10min ISO 1133
온도 190 °C -
负荷 2.16 kg -
기계적 특성단위시험규격
ISO 데이터
인장탄성률 9300 MPa ISO 527
인장 강도 120 MPa ISO 527
파단시 신율 2 % ISO 527
굴곡 강도 160 MPa ISO 178
챠피 충격 강도, +23°C 30 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 4.5 kJ/m² ISO 179/1eA
Ball indentation hardness 220 MPa ISO 2039-1
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 160 °C ISO 75-1/-2
비카트 연화 온도, B 160 °C ISO 306
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
기타 특성단위시험규격
밀도 1590 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
Pre-drying - Temperature 100 °C -
Pre-drying - Time 2 - 3 h -
Processing humidity ≤0.1 % -
성형온도 60 - 120 °C -
Feed temperature 150 - 170 °C -
Zone 1 170 - 190 °C -
Nozzle temperature 190 - 210 °C -
Maximum residence time 20 min -
특징
생산 공정
사출 성형
특별 특성
열안정성
응용
캡슐화된
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.