Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Tenite™ Butyrate 576E3720010 - CAB - Eastman Chemical Co.

Material Data Center offers the following functions for Tenite™ Butyrate 576E3720010:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tenite datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 광학 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Tenite™ cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite™ cellulosic plastics differ with  plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite™ Cellulose Acetate Butyrate 576-10 contains an odor mask and an ultra-violet inhibitor(UVI). It has a plasticizer level of 10%.




Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.004 mm/mm ASTM D 955
기계적 특성값단위시험규격
ASTM 데이터
항복강도 33.1 MPa ASTM D 638
파단시 강도 43.4 MPa ASTM D 638
파단시 신율 50 % ASTM D 638
굴곡 계수 1379 MPa ASTM D 790
로크웰 경도 R 78 - ASTM D 785
아이조드 충격은 노치, 1/8 in 240 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 96 J/m ASTM D 256
온도 -40 °C -
열적 특성값단위시험규격
ASTM 데이터
열팽창 계수, 평행 140 E-6/K ASTM D 696
DTUL @ 66 psi 85 °C ASTM D 648
DTUL @ 264 psi 74 °C ASTM D 648
비카트 연화 온도 104 °C ASTM D 1525
열전도율, 솔리드 0.036 W/(m K) ASTM C 177
전기적 특성값단위시험규격
ASTM 데이터
전기 압력, 단기간의 15.3 kV/mm ASTM D 149
소산 인자, 1 MHz 0.08 - ASTM D 150
상대 유전율, 1 MHz 3.55 - ASTM D 150
부피 저항 1E15 Ohm*cm ASTM D 257
광학 특성값단위시험규격
ASTM 데이터
탁도 8.5 % ASTM D 1003
굴절 지수 1.48 - ASTM D 542
기타 특성값단위시험규격
물에서의 흡수성, 24hr 1.4 % ASTM D 570
밀도 1190 kg/m³ ASTM D 792
특징
생산 공정
외형 압출
부가물
가소제
특별 특성
U.V. 안정성 또는 기후 안정성, 투명도
특성
High Gloss, Low Odor
Certifications
Contains renewable resources
응용
자동차의, IT / 비즈니스 기계, 전기 및 전자 , 포장, 스포츠 장비, 장난감
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.