Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of SABIC® PP 58MNK10 - PP - Saudi Basic Industries Corporation (SABIC)
Material Data Center offers the following functions for SABIC® PP 58MNK10:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces
Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center
Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our
disclaimer.
제품 설명서
This grade combines an excellent stiffnesswith high impact resistance. It has a low tendency to warp. Excellent flow in combination with high crystallisation speed enables outstanding processability aiming at easy mould filling and short cycle times. Thanks to the mentioned performance this grade is typically used in several kinds of containers. The excellent gloss level makes this material also favourable for household applications.
Health, Safety and Food Contact regulations: Material Safety Data Sheets (MSDS) and Product Safety declarations are available on our Internet site
http://www.SABIC.comThis product is not intended for and must not be used in any pharmaceutical/medical applications.
This grade material is UL registered under File E111275 (www.ul.com). IMDS 80775790
| 기계적 특성 | 값 | 단위 | 시험규격 |
| ISO 데이터 |
| 인장탄성률 |
1550 |
MPa |
ISO 527 |
| 항복강도 |
27 |
MPa |
ISO 527 |
| 항복변형률 |
4 |
% |
ISO 527 |
| 챠피 노치드 충격 강도, +23°C |
12.5 |
kJ/m² |
ISO 179/1eA |
| 아이조드 충격은 노치 |
6 |
kJ/m² |
ISO 180/1A |
| 쇼어 D 경도 |
65 |
- |
ISO 7619-1 |
| 열적 특성 | 값 | 단위 | 시험규격 |
| ISO 데이터 |
| 하중하에서의 변형온도, 1.80 MPa |
60 |
°C |
ISO 75-1/-2 |
| 하중하에서의 변형온도, 0.45 MPa |
100 |
°C |
ISO 75-1/-2 |
| 비카트 연화 온도, A |
151 |
°C |
ISO 306 |
| 비카트 연화 온도, B |
80 |
°C |
ISO 306 |
특징
Certifications
Food contact
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
