Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 218BJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 218BJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 광학 특성 - 기계적 성질 (필름)
Any use of this information falls under the rules of our disclaimer.
제품 설명서
SABIC® LLDPE 218BJ is a butene linear low density polyethylene resin with an additive package typically designed for a broader range of food applications (TNPP free). The good thermal stability allows to use the resin in critical extrusion processing conditions. Films produced from SABIC® LLDPE 218BJ have better draw-down ability compared to lower MFR LLDPE resins. This product is not intended for and must not be used in any pharmaceutical/medical applications.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 2 g/10min ASTM D 1238
온도 190 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ISO 데이터
쇼어 D 경도 48 - ISO 7619-1
ASTM 데이터
항복강도 12 MPa ASTM D 638
파단시 강도 17 MPa ASTM D 638
항복변형률 16 % ASTM D 638
파단시 신율 790 % ASTM D 638
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, A 96 °C ISO 306
ASTM 데이터
비카트 연화 온도 98 °C ASTM D 1525
전기적 특성값단위시험규격
ASTM 데이터
소산 인자, 60 Hz 1000 - ASTM D 150
상대 유전율, 60 Hz 2.17 - ASTM D 150
부피 저항 >1E15 Ohm*cm ASTM D 257
광학 특성값단위시험규격
ASTM 데이터
탁도 1.2 % ASTM D 1003
기계적 성질 (필름) 값단위시험규격
ISO 데이터
트라우저 전단강도, 수직 185 N/mm ISO 6383-1
ASTM Data
인장탄성률, 평행 31 MPa ASTM D 882
인장탄성률, 수직 670 MPa ASTM D 882
항복강도, 평행 12 MPa ASTM D 882
항복강도, 수직 10 MPa ASTM D 882
파단시 강도, 평행 22 MPa ASTM D 882
파단시 신율 , 평행 550 % ASTM D 882
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.