Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® BESNO P40 TLO - PA11 - ARKEMA

Material Data Center offers the following functions for Rilsan® BESNO P40 TLO:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
PA11-P, EHL, 22-003
Rilsan® BESNO P40 TLO resin is a polyamide 11 produced from a renewable source. This natural grade is plasticized and designed for extrusion. This grade contains a low amount of oligomers.

The percentage of renewable carbon according to ASTM D 6866 (calculated) is >85%.


Main applications:
  • Fluid transportation
  • Tubing for use in motor vehicle
  • Clean hose for offshore umbilicals


Packaging:
This grade is delivered dried in sealed packaging (25 kg bags, 550 kg rigid containers) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
기계적 특성건조/응축단위시험규격
ISO 데이터
인장탄성률 - / 310 MPa ISO 527
항복강도 - / 26 MPa ISO 527
항복변형률 - / 46 % ISO 527
파단시 평균신율 - / >50 % ISO 527
챠피 노치드 충격 강도, -30°C - / 6 kJ/m² ISO 179/1eA
쇼어 D 경도 60 / * - ISO 7619-1
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 182 / * °C ISO 11357-1/-3
기타 특성건조/응축단위시험규격
밀도 1040 / 1040 kg/m³ ISO 1183
Biobased content 85 % -
특징
생산 공정
외형 압출, 기타 압출
인도 유형
펠렛 (입자,알갱이)
부가물
윤활제, 가소제
특별 특성
가시광선 안정성, U.V. 안정성 또는 기후 안정성, 열안정성
Certifications
Contains renewable resources
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
기타 정보
기타 압출

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 230°C / 250°C / 280°C.

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-8 hours at 80-90°C.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.