Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RAVAMID® A MF30 BK - PA66-MX30 - Ravago Group

Material Data Center offers the following functions for RAVAMID® A MF30 BK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ravamid datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
성형 수축률, 평행 0.5 % ISO 294-4, 2577
성형 수축률, 수직 0.6 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
항복강도 60 MPa ISO 527
파단시 강도 55 MPa ISO 527
파단시 신율 4 % ISO 527
굴곡 계수, 23°C 4500 MPa ISO 178
챠피 충격 강도, +23°C 80 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 6.5 kJ/m² ISO 179/1eA
아이조드 충격은 노치, +23°C 7.5 kJ/m² ISO 180/1A
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 105 °C ISO 75-1/-2
비카트 연화 온도, B 235 °C ISO 306
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 3.2 mm -
연소속도, FMVSS, 두께 1mm 100 mm/min ISO 3795 (FMVSS 302)
Glow Wire Flammability Index (GWFI) 650 °C IEC 60695-2-12
GWFI - thickness tested (1) 2 mm -
기타 특성값단위시험규격
조건에서의 흡습성 0.2 % ISO 62와 유사
밀도 1350 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 85 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.12 % -
용융수지온도 270 - 290 °C -
성형온도 70 - 90 °C -
Zone 1 250 - 260 °C -
Zone 2 260 - 270 °C -
Zone 3 280 - 290 °C -
Nozzle temperature 280 - 285 °C -
Screw speed 50 - 80 rpm -
Back pressure 0.4 - 0.8 MPa -
유지압력 6 - 8 MPa -
특징
생산 공정
사출 성형
인도 유형
검정
특별 특성
U.V. 안정성 또는 기후 안정성, 열안정성
Certifications
Recycled Resin Content
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.