Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Novodur® P2MC - ABS - INEOS Styrolution

Material Data Center offers the following functions for Novodur® P2MC:
unit conversion, PDF datasheet print, comparison with other plastics, flow length calculation, snap fit calculation, beam deflection calculation, cooling time calculation, parameters for material models, CAE Interfaces

Check here, which other Novodur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 테스트 견본 생산 - 도표
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Electroplating grade
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 25 cm³/10min ISO 1133
온도 220 °C -
하중 10 kg -
용융 밀도 885 kg/m³ -
용융 열전도율 0.127 W/(m K) -
용융 비열용량 1800 J/(kg K) -
이형온도 85 °C -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2200 MPa ISO 527
항복강도 40 MPa ISO 527
항복변형률 2.4 % ISO 527
챠피 충격 강도 , +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 150 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 24 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 14 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 94 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 96 °C ISO 75-1/-2
비카트 연화 온도, B 95 °C ISO 306
선형 열팽창 계수, 평행 100 E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.6 mm -
전기적 특성값단위시험규격
ISO 데이터
상대 유전율, 100Hz 3 - IEC 62631-2-1
상대 유전뮬, 1MHz 2.9 - IEC 62631-2-1
소산 인자, 100Hz 50 E-4 IEC 62631-2-1
소산 인자, 1MHz 80 E-4 IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
전기 압력 37 kV/mm IEC 60243-1
CTI 600 - IEC 60112
기타 특성값단위시험규격
밀도 1040 kg/m³ ISO 1183
테스트 견본 생산값단위시험규격
ISO 데이터
사출성형: 용융수지온도 240 °C ISO 294
사출성형: 금형온도 70 °C ISO 294
사출성형: 사출속도 240 mm/s ISO 294
도표
점도-변형률 , Novodur® P2MC, ABS, INEOS Styrolution
전단-변형률 , Novodur® P2MC, ABS, INEOS Styrolution
동전단탄성율-온도 , Novodur® P2MC, ABS, INEOS Styrolution
비용적-온도(pvT) , Novodur® P2MC, ABS, INEOS Styrolution
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
특별 특성
도금가능한
지역별 검색
짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.