Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NP6100 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NP6100 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL™ NP6100 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS) designed for high heat resistance with good strength, toughness and robust FR performance. This extrudable grade contains non-brominated, non-chlorinated flame retardant. NORYL NP6100 resin may be an excellent candidate for mining pipe applications as well as low smoke cable channel applications where EN45545 R22 certificate ( European railway standard for small electrical parts) is required.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 11 cm³/10min ISO 1133
온도 280 °C -
하중 10 kg -
ASTM 데이터
용융 흐름성, MFI 10.5 g/10min ASTM D 1238
온도 280 °C -
하중 10 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2330 MPa ISO 527
항복강도 68 MPa ISO 527
항복변형률 4.5 % ISO 527
파단시 강도 52 MPa ISO 527
파단시 신율 7 % ISO 527
굴곡 계수 2350 MPa ISO 178
챠피 충격 강도, +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 37 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 21 kJ/m² ISO 179/1eA
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 4mm 39.9 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 15.8 kJ/m² ISO 180/1A
ASTM 데이터
항복강도 60 MPa ASTM D 638
파단시 강도 47 MPa ASTM D 638
항복변형률 4.5 % ASTM D 638
파단시 신율 10.5 % ASTM D 638
아이조드 충격은 노치, 1/8 in 510 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 180 J/m ASTM D 256
온도 -30 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 0.45 MPa 146 °C ISO 75-1/-2
비카트 연화 온도, B 151 °C ISO 306
비카트 연화 온도, 120°C/h 50N 153 °C ISO 306
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 1 mm -
ASTM 데이터
DTUL @ 264 psi 121 °C ASTM D 648
기타 특성값단위시험규격
밀도 1080 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 90 - 100 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
용융수지온도 255 - 275 °C -
Zone 1 235 - 255 °C -
Zone 2 255 - 275 °C -
Zone 3 255 - 275 °C -
특징
부가물
난연제
특별 특성
난연성
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.