Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX678 - Europe - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

NORYL GTX™ 678 resin is a conductive, high performance non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is optimized for primer-less electrostatic and powder coat painting, and it is UL 5VA rated with a non-brominated, non-chlorinated FR package. NORYL GTX678 resin exhibits an excellent balance of conductivity, high heat resistance, good ductility, and is heat stabilized. This material is an excellent candidate for non-automotive painted applications such as office furniture, PVC/metal replacement, lighting ballast housings / enclosures, and appliance exteriors.

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR	7	cm³/10min	ISO 1133
온도	300	°C	-
하중	5	kg	-
용융 밀도	992	kg/m³	-
용융 열전도율	0.2	W/(m K)	-
용융 비열용량	1960	J/(kg K)	-
이형온도	145	°C	-
ASTM 데이터
용융 흐름성, MFI	7.8	g/10min	ASTM D 1238
온도	300	°C	-
하중	5	kg	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2900	MPa	ISO 527
항복강도	58	MPa	ISO 527
항복변형률	7	%	ISO 527
파단시 강도	52	MPa	ISO 527
파단시 신율	12	%	ISO 527
굴곡 계수	2600	MPa	ISO 178
챠피 노치드 충격 강도, +23°C	12	kJ/m²	ISO 179/1eA
아이조드 노치 충격 강도, +23°C, 4mm	10	kJ/m²	ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm	7	kJ/m²	ISO 180/1A
ASTM 데이터
인장탄성률	2900	MPa	ASTM D 638
항복강도	58	MPa	ASTM D 638
파단시 강도	52	MPa	ASTM D 638
항복변형률	7	%	ASTM D 638
파단시 신율	12	%	ASTM D 638
굴곡 계수	2600	MPa	ASTM D 790
아이조드 충격은 노치, 1/8 in	100	J/m	ASTM D 256
아이조드 충격은 노치, Low-Temperature	70	J/m	ASTM D 256
온도	-30	°C	-

열적 특성	값	단위	시험규격
ISO 데이터
하중하에서의 변형온도, 0.45 MPa	191	°C	ISO 75-1/-2
비카트 연화 온도, B	197	°C	ISO 306
비카트 연화 온도, 120°C/h 50N	195	°C	ISO 306
선형 열팽창 계수, 평행	83	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	85	E-6/K	ISO 11359-1/-2
ASTM 데이터
DTUL @ 66 psi	195	°C	ASTM D 648
비카트 연화 온도	198	°C	ASTM D 1525
열전도율, 솔리드	0.0288	W/(m K)	ASTM C 177
비열용량	1400	J/(kg K)	ASTM C 351

전기적 특성	값	단위	시험규격
ASTM 데이터
부피 저항	4000	Ohm*cm	ASTM D 257

기타 특성	값	단위	시험규격
물에서의 흡수성	4	%	ISO 62와 유사
조건에서의 흡습성	0.5	%	ISO 62와 유사
밀도	1120	kg/m³	ISO 1183
밀도	1120	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	95 - 105	°C	-
Pre-drying - Time	3 - 4	h	-
Processing humidity	≤0.07	%	-
용융수지온도	275 - 300	°C	-
성형온도	65 - 95	°C	-
Zone 1	260 - 300	°C	-
Zone 2	265 - 300	°C	-
Zone 3	270 - 300	°C	-
Screw speed	20 - 100	rpm	-
Back pressure	0.3 - 1.4	MPa	-

도표

특징

생산 공정

사출 성형

지역별 검색

짱쨌쨈

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.