Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LOXILENE PP TA20 UV3 IM3 08050 - PP-T20 - Loxim Industries Limited

Material Data Center offers the following functions for LOXILENE PP TA20 UV3 IM3 08050:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Loxilene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 흐름성, MFI 12 g/10min ISO 1133
온도 230 °C -
负荷 2.16 kg -
기계적 특성단위시험규격
ISO 데이터
항복강도 23 MPa ISO 527
파단시 신율 >50 % ISO 527
굴곡 계수, 23°C 1850 MPa ISO 178
굴곡 강도 35 MPa ISO 178
아이조드 충격은 노치, +23°C 25 kJ/m² ISO 180/1A
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 0.45 MPa 120 °C ISO 75-1/-2
기타 특성단위시험규격
밀도 1040 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
Pre-drying - Temperature 80 °C -
Pre-drying - Time 2 h -
Processing humidity ≤0.2 % -
용융수지온도 190 - 230 °C -
성형온도 30 - 65 °C -
특징
생산 공정
사출 성형
특별 특성
고충격 또는 고충격 보강, U.V. 안정성 또는 기후 안정성, 열안정성
내화학성에
General Chemical Resistance
응용
자동차의
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.