Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXM121R - Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXM121R - Americas:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
PC in special effects colors. Metallic and pearlescent additives. Color package may affect performance.

UL Yellow Card Link E121562-220943
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 18.2 g/10min ASTM D 1238
온도 300 °C -
하중 1.2 kg -
기계적 특성값단위시험규격
ASTM 데이터
인장탄성률 2340 MPa ASTM D 638
항복강도 61 MPa ASTM D 638
파단시 강도 57 MPa ASTM D 638
항복변형률 6.2 % ASTM D 638
파단시 신율 90 % ASTM D 638
굴곡 계수 2370 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 106 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 0.7 mm -
ASTM 데이터
DTUL @ 66 psi 135 °C ASTM D 648
DTUL @ 264 psi 123 °C ASTM D 648
기타 특성값단위시험규격
밀도 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
용융수지온도 280 - 305 °C -
성형온도 70 - 95 °C -
Zone 1 260 - 280 °C -
Zone 2 270 - 295 °C -
Zone 3 280 - 305 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
특징
생산 공정
사출 성형
응용
자동차의
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.