Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer EXL6414 - Europe - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer EXL6414 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
PC-Siloxane copolymer with excellent processability. Impact modified, medium flow, extreme low temp. ductility.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 7 cm³/10min ISO 1133
온도 300 °C -
하중 1.2 kg -
ASTM 데이터
용융 흐름성, MFI 8 g/10min ASTM D 1238
온도 300 °C -
하중 1.2 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2270 MPa ISO 527
항복강도 54 MPa ISO 527
항복변형률 6 % ISO 527
파단시 강도 58 MPa ISO 527
파단시 신율 50 % ISO 527
굴곡 계수 2090 MPa ISO 178
챠피 충격 강도, +23°C, 3mm N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C, 3mm N kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C, 3mm 70 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C, 3mm 60 kJ/m² ISO 179/1eA
Izod충격강도, +23°C N kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 3mm 70 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 3mm 60 kJ/m² ISO 180/1A
ASTM 데이터
인장탄성률 1720 MPa ASTM D 638
항복강도 55 MPa ASTM D 638
파단시 강도 59 MPa ASTM D 638
항복변형률 5.5 % ASTM D 638
파단시 신율 100 % ASTM D 638
굴곡 계수 1990 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 801 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 694 J/m ASTM D 256
온도 -30 °C -
Izod충격강도, 1/8 in 3200 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, B 141 °C ISO 306
비카트 연화 온도, 120°C/h 50N 140 °C ISO 306
ASTM 데이터
DTUL @ 66 psi 136 °C ASTM D 648
DTUL @ 264 psi 122 °C ASTM D 648
비카트 연화 온도 141 °C ASTM D 1525
전기적 특성값단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 2.6 - IEC 62631-2-1
소산 인자, 1MHz 94 E-4 IEC 62631-2-1
부피 저항 >1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
기타 특성값단위시험규격
물에서의 흡수성 0.35 % ISO 62와 유사
조건에서의 흡습성 0.15 % ISO 62와 유사
밀도 1180 kg/m³ ISO 1183
밀도 1190 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
용융수지온도 295 - 315 °C -
성형온도 70 - 95 °C -
Zone 1 270 - 295 °C -
Zone 2 280 - 305 °C -
Zone 3 295 - 315 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
특징
생산 공정
사출 성형
특별 특성
고충격 또는 고충격 보강
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.