Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Kareline® PPMS5050EC - PP-L - Plasthill Oy

Material Data Center offers the following functions for Kareline® PPMS5050EC:
unit conversion, PDF datasheet print, comparison with other plastics, application examples, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Kareline datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 9.6 cm³/10min ISO 1133
온도 200 °C -
하중 10 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1700 MPa ISO 527
항복강도 43 MPa ISO 527
항복변형률 3 % ISO 527
굴곡 계수, 23°C 4700 MPa ISO 178
챠피 노치드 충격 강도, +23°C 2.4 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
선형 열팽창 계수, 평행 52 E-6/K ISO 11359-1/-2
두께 H인 제품의 난연성 HB class IEC 60695-11-10
기타 특성값단위시험규격
밀도 1050 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 100 °C -
Pre-drying - Time 4 h -
성형온도 20 - 40 °C -
Feed temperature 180 °C -
Zone 1 190 °C -
Zone 2 195 °C -
Zone 3 200 °C -
Injection speed 100 mm/s -
특징
생산 공정
사출 성형
인도 유형
화이트
특별 특성
U.V. 안정성 또는 기후 안정성, Opaque, Translucent, 증기 멸균, Gamma irradiation sterilization, Electron beam (e-beam) sterilization
특성
High Gloss, Laser Markable, Metal Detectable, Metallic effect, Thermal Stability, Weldable, Homopolymer
내화학성에
Acid Resistance, General Chemical Resistance, Oil Resistance
Certifications
Contains renewable resources, Recycled Resin Content, US Pharmacopeia Class VI Approved, 퇴비화 가능 ISO 13432 (증명서)
지역별 검색
짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.