Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ GN2450-1 - PA9T-GF45 FR - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Genestar GN2450-1 is a 45%GF grade suitable for reflow components.
Thanks to its JEDEC MSL 1 rating (moisture sensitive level 1), this grade shows an excellent resistance to blisters.

The main features of GN2450 are:
　- a High strength
　- a High modulus

GN2450-1 is suitable for FPC sliders and IC sockets.

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
성형 수축률, 평행	0.2	%	ISO 294-4, 2577
성형 수축률, 수직	0.6	%	ISO 294-4, 2577
ASTM 데이터
용융 흐름성, MFI	15	g/10min	ASTM D 1238
온도	320	°C	-
하중	2.16	kg	-

기계적 특성	값	단위	시험규격
ISO 데이터
파단시 강도	200	MPa	ISO 527
파단시 신율	1.6	%	ISO 527
챠피 노치드 충격 강도, +23°C	14	kJ/m²	ISO 179/1eA
ASTM 데이터
인장 강도	200	MPa	ASTM D 638
굴곡 계수	14000	MPa	ASTM D 790
굴곡 강도	270	MPa	ASTM D 790
아이조드 충격은 노치, 1/8 in	105	J/m	ASTM D 256

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	306	°C	ISO 11357-1/-3
유리 전이 온도, 10 °C/min	125	°C	ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa	285	°C	ISO 75-1/-2
ASTM 데이터
UL94 난연성	V-0	-	UL 94
DTUL @ 264 psi	285	°C	ASTM D 648
녹는점	306	°C	ASTM D 3418
유리 전이 온도	125	°C	ASTM E 1356

전기적 특성	값	단위	시험규격
ASTM 데이터
전기 압력, 단기간의	30	kV/mm	ASTM D 149
부피 저항	>1E15	Ohm*cm	ASTM D 257

기타 특성	값	단위	시험규격
물에서의 흡수성	0.1	%	ISO 62와 유사
밀도	1730	kg/m³	ASTM D 792

도표

특징

생산 공정

사출 성형

특별 특성

난연성, 열안정성

특성

Weldable

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.