Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of EXTEM™ Resin VH1003F - Europe - PI - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for EXTEM™ Resin VH1003F - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Extem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Transparent, Thermoplastic Polyimide (TPI) resin with a glass transition temperature (Tg) of 247C. This product has thinwall FR capability and has a UL94 V0 listing. This material is RoHS compliant and also halogen free according VDE/DIN 472 part 815. Global Food Contact Approvals. Resin is a Dual-use item and is subject to export control restrictions under both U.S. 15 CFR 774 and Annex I of Reg. (EC) 428/2009 as ECCN 1C008. Diversion contrary to law is prohibited.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 8 cm³/10min ISO 1133
온도 360 °C -
하중 5 kg -
ASTM 데이터
용융 흐름성, MFI 15.5 g/10min ASTM D 1238
온도 367 °C -
하중 6.6 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 3110 MPa ISO 527
항복강도 95 MPa ISO 527
항복변형률 8.5 % ISO 527
파단시 강도 78 MPa ISO 527
파단시 신율 50 % ISO 527
굴곡 계수 3080 MPa ISO 178
챠피 충격 강도, +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C N kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm N kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 4mm 4 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 5 kJ/m² ISO 180/1A
Ball indentation hardness 140 MPa ISO 2039-1
ASTM 데이터
인장탄성률 3510 MPa ASTM D 638
항복강도 96 MPa ASTM D 638
파단시 강도 96 MPa ASTM D 638
항복변형률 6 % ASTM D 638
파단시 신율 50 % ASTM D 638
굴곡 계수 3170 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 69 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 74 J/m ASTM D 256
온도 -30 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 228 °C ISO 75-1/-2
비카트 연화 온도, B 242 °C ISO 306
비카트 연화 온도, 120°C/h 50N 238 °C ISO 306
Glow Wire Flammability Index (GWFI) 960 °C IEC 60695-2-12
GWFI - thickness tested (3) 3.2 mm -
Glow Wire Ignition Temperature (GWIT) 850 °C IEC 60695-2-13
GWIT - thickness tested (3) 3 mm -
ASTM 데이터
DTUL @ 264 psi 217 °C ASTM D 648
비카트 연화 온도 242 °C ASTM D 1525
전기적 특성값단위시험규격
ISO 데이터
소산 인자, 100Hz 80 E-4 IEC 62631-2-1
소산 인자, 1MHz 70 E-4 IEC 62631-2-1
CTI 175 - IEC 60112
ASTM 데이터
전기 압력, 단기간의 17 kV/mm ASTM D 149
기타 특성값단위시험규격
물에서의 흡수성 1.75 % ISO 62와 유사
조건에서의 흡습성 0.6 % ISO 62와 유사
밀도 1300 kg/m³ ISO 1183
밀도 1300 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
용융수지온도 380 - 405 °C -
성형온도 135 - 165 °C -
Zone 1 360 - 380 °C -
Zone 2 370 - 395 °C -
Zone 3 380 - 405 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
특징
생산 공정
사출 성형
특별 특성
투명도
Certifications
Food contact, RoHS
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.