Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ECOZEN® T110 Plus - Copolyester - SK Chemicals

Material Data Center offers the following functions for ECOZEN® T110 Plus:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ecozen datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
ECOZEN® is a glycol-modified polyethylene terephthalate with exceptional transparency and chemical resistance.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
성형 수축률, 평행 0.0035 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
항복강도 50 MPa ISO 527
항복변형률 6.5 % ISO 527
파단시 강도 51 MPa ISO 527
파단시 신율 197 % ISO 527
굴곡 계수, 23°C 1900 MPa ISO 178
굴곡 강도 72 MPa ISO 178
아이조드 충격은 노치, +23°C 93 kJ/m² ISO 180/1A
ASTM 데이터
항복강도 48 MPa ASTM D 638
파단시 강도 52 MPa ASTM D 638
항복변형률 6.6 % ASTM D 638
파단시 신율 215 % ASTM D 638
굴곡 계수 1962 MPa ASTM D 790
굴곡 강도 79.5 MPa ASTM D 790
로크웰 경도 R 115 - ASTM D 785
아이조드 충격은 노치, 1/8 in 860 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 80 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 96 °C ISO 75-1/-2
ASTM 데이터
DTUL @ 66 psi 98 °C ASTM D 648
DTUL @ 264 psi 81 °C ASTM D 648
광학 특성값단위시험규격
ASTM 데이터
탁도 2 % ASTM D 1003
광선 투겠淅 85 % ASTM D 1003
기타 특성값단위시험규격
밀도 1250 kg/m³ ASTM D 792
특징
특별 특성
열안정성, 투명도
특성
Copolymer
내화학성에
General Chemical Resistance
Certifications
Contains renewable resources, Food contact, RoHS
응용
포장
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.