Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultrasint PA11 - PA11 - BASF

Material Data Center offers the following functions for Ultrasint PA11:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultrasint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 열적 특성 - 기타 특성 - 3D Data
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 28 / * cm³/10min ISO 1133
온도 220 / * °C -
하중 2.16 / * kg -
열적 특성건조/응축단위시험규격
ISO 데이터
녹는점, 10°C/min 203 / * °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 76 / * °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 176 / * °C ISO 75-1/-2
비카트 연화 온도, A 191 / * °C ISO 306
비카트 연화 온도, B 177 / * °C ISO 306
기타 특성건조/응축단위시험규격
밀도 1020 / - kg/m³ ISO 1183
Bulk density 520 kg/m³ -
3D Data건조/응축단위시험규격
Other Standards[S]
인장탄성률, flat 1750 / 1100 MPa ISO 527
인장탄성률, upright 1800 / 1250 MPa ISO 527
인장 강도, flat 52 / 45 MPa ISO 527
인장 강도, upright 54 / 46 MPa ISO 527
파단시 신율 , flat 28 / 45 % ISO 527
파단시 신율 , upright 24 / 31 % ISO 527
굴곡 계수, flat 1750 / 1250 MPa ISO 178
굴곡 계수, upright 1800 / 1300 MPa ISO 178
챠피 충격 강도 , +23°C, flat 184 / 198 kJ/m² ISO 179/1eU
챠피 충격 강도, +23°C, upright 85 / 85 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C, flat 5.1 / 8.3 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, +23°C, upright 3.9 / 4.5 kJ/m² ISO 179/1eA
Izod충격강도, +23°C, flat 0 / 0 kJ/m² ISO 180/1U
Izod충격강도, +23°C, upright 54 / 86 kJ/m² ISO 180/1U
아이조드 충격은 노치, +23°C, flat 6.5 / 7.7 kJ/m² ISO 180/1A
아이조드 충격은 노치, +23°C, upright 4.8 / 5.2 kJ/m² ISO 180/1A
S: These properties are reported by the producer according standards that are different to our defaults.
특징
생산 공정
Additive Manufacturing, Laser Sintering
인도 유형
가루, 화이트
특별 특성
고충격 또는 고충격 보강
특성
Ductile
내화학성에
General Chemical Resistance, Oil Resistance
Certifications
Contains renewable resources
응용
자동차의
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.