Any use of this information falls under the rules of our
disclaimer.
Processing/Physical Characteristics | 값 | 단위 | 시험규격 |
ISO 데이터 |
용융 흐름성, MFI |
4 |
g/10min |
ISO 1133 |
온도 |
190 |
°C |
- |
负荷 |
2.16 |
kg |
- |
기계적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
쇼어 D 경도 |
48 |
- |
ISO 7619-1 |
열적 특성 | 값 | 단위 | 시험규격 |
ISO 데이터 |
비카트 연화 온도, A |
92 |
°C |
ISO 306 |
광학 특성 | 값 | 단위 | 시험규격 |
ISO Data |
탁도 |
9 |
- |
ISO 14782 |
기타 특성 | 값 | 단위 | 시험규격 |
밀도 |
922 |
kg/m³ |
ISO 1183 |
기계적 성질 (필름) | 값 | 단위 | 시험규격 |
ISO 데이터 |
최대강도, parallel |
21 |
MPa |
ISO 527-3 |
최대강도, 평행 |
15 |
MPa |
ISO 527-3 |
최대변형율, 평행 |
270 |
% |
ISO 527-3 |
최대변형율, 수직 |
560 |
% |
ISO 527-3 |
다트 낙하 충격, 방법 A |
80 |
g |
ISO 7765-1 |
압출 유형 |
blown |
- |
- |
시편두께 |
0.04 |
mm |
- |
Processing Recommendation Injection Molding | 값 | 단위 | 시험규격 |
용융수지온도 |
150 - 190 |
°C |
- |
Processing Recommendation Extrusion | 값 | 단위 | 시험규격 |
용융수지온도 |
150 - 190 |
°C |
- |
특징
생산 공정
사출 성형, Blown Film Extrusion, 필름 압출
인도 유형
펠렛 (입자,알갱이)
부가물
점착방지제
특별 특성
투명도
Certifications
Food contact, Food approval 1935/2004/EC, Food approval 10/2011, Food approval FDA 21 CFR, RoHS
응용
전기 및 전자 , 포장
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com