Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TAIRILOY® AC2500-AF - (PC+ABS) - Formosa Chemicals & Fibre Corp.

Material Data Center offers the following functions for TAIRILOY® AC2500-AF:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Tairiloy datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 37 g/10min ISO 1133
온도 260 °C -
负荷 5 kg -
성형 수축률, 평행 0.5 % ISO 294-4, 2577
ASTM 데이터
용융 흐름성, MFI 17 g/10min ASTM D 1238
온도 240 °C -
하중 5 kg -
성형 수축률, 평행 0.005 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장 강도 54 MPa ISO 527
굴곡 계수, 23°C 2450 MPa ISO 178
굴곡 강도 93 MPa ISO 178
챠피 충격 강도, +23°C 70 kJ/m² ISO 179/1eU
로크웰 경도 R 114 - ISO 2039-2
ASTM 데이터
인장 강도 54 MPa ASTM D 638
굴곡 계수 2452 MPa ASTM D 790
굴곡 강도 93.2 MPa ASTM D 790
로크웰 경도 R 114 - ASTM D 785
아이조드 충격은 노치, 1/8 in 559 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 106 °C ISO 75-1/-2
비카트 연화 온도, A 130 °C ISO 306
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.5 mm -
Yellow Card 유효한 예 - -
두께 H인 제품의 난연성 HB class IEC 60695-11-10
테스트 두께 3.0 mm -
Yellow Card 유효한 예 - -
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.5 mm -
DTUL @ 264 psi 106 °C ASTM D 648
비카트 연화 온도 130 °C ASTM D 1525
기타 특성값단위시험규격
밀도 1120 kg/m³ ISO 1183
밀도 1120 kg/m³ ASTM D 792
특징
특별 특성
열안정성
Certifications
RoHS
응용
범용
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.