Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Sarlink® 4785B40 - TPV - Teknor Apex Co.

Material Data Center offers the following functions for Sarlink® 4785B40:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sarlink datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서

The Sarlink TPV 4700 Series are high flow injection molding engineering grades with excellent UV resistance, elasticity, and surface aesthetics designed for demanding automotive applications including window encapsulation and exterior parts. Sarlink TPV 4785B40 is a black, medium hardness, low density thermoplastic vulcanizate suited for injection molding applications that require superior flow properties.



PropertyValueUnitStandard
Tensile properties (Cross Flow Direction)

ISO 37
   Tensile strength at break     9,5 MPa
   Modulus at 100% elongation     4,8 MPa
   Elongation at break    540 %
Hot air aging (168h/150°C, Cross Flow Direction)

ISO 188
   Change in hardness        3 points
   Change in tensile strength at break     -10 %
   Change in modulus at 100% elongation        7 %
   Change in elongation at break     -18 %
Hot air aging (1000h/135°C, Cross Flow Direction)

ISO 188
   Change in hardness      1 points
   Change in tensile strength at break     -4 %
   Change in modulus at 100% elongation       9
 %
   Change in elongation at break    -14
 %
Volume swell (70h/125°C in IRM 903 oil)     65 % ISO 1817
Apparent shear viscosity @ 206 1/s, 200°C    190 Pa.s ISO 11443 Capillary
기계적 특성값단위시험규격
ISO 데이터
23 C, 영구 압축줄음율, 24h 32 % ISO 815
70 C, 영구 압축줄음율, 24h 44 % ISO 815
쇼어 A 경도 86 - ISO 7619-1
Other Standards[S]
100% 변형시 강도 5.5 MPa ISO 37
파단시 강도 TPE 8.9 MPa ISO 37
파단시 신율 TPE 450 % ISO 37
S: These properties are reported by the producer according standards that are different to our defaults.
기타 특성값단위시험규격
밀도 910 kg/m³ ISO 1183
특징
생산 공정
사출 성형
인도 유형
검정
특별 특성
열안정성
내화학성에
General Chemical Resistance
응용
자동차의, 캡슐화된
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.