Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SMCarbon® 24 CF50-12K - VE-CF50 - Polynt S.p.A.

Material Data Center offers the following functions for SMCarbon® 24 CF50-12K:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other SMCarbon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
Shelf life at -18°C: 6 months
Shelf life at RT 23°C: 8 weeks
Fibre length: 25 mm
Fibre: 12K
Area weight: 1500 g/m2
Typical Cure temperature: 125 - 140 °C
Typical moulding pressure: 80 - 120 bar
Typical Cure time: 35 sec/mm
Processing/Physical Characteristics값단위시험규격
ISO 데이터
성형 수축률, 평행 -0.1 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 25400 MPa ISO 527
인장 강도 108 MPa ISO 527
챠피 충격 강도, +23°C 46 kJ/m² ISO 179/1eU
Other Standards[S]
굴곡 계수, 23°C 22700 MPa ISO 14125
굴곡 강도 285 MPa ISO 14125
S: These properties are reported by the producer according standards that are different to our defaults.
열적 특성값단위시험규격
ISO 데이터
유리 전이 온도, 10 °C/min 170 °C ISO 11357-1/-2
기타 특성값단위시험규격
밀도 1400 kg/m³ ISO 1183
특징
생산 공정
Compression Molding
인도 유형
쉬트 몰딩 콤파운드
응용
자동차의
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.