Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Provista™ UVO - Copolyester - Eastman Chemical Co.

Material Data Center offers the following functions for Provista™ UVO:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Provista datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
기계적 특성 - 열적 특성 - 광학 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서

Eastman Provista™ UVO is a copolymer with an indoor/outdoor UV package added to prevent yellowing caused by light. Provista™ copolymer is a resin specifically developed for extrusion into profiles where aesthetics like high clarity and gloss, coupled with design flexibility drive demand. Compared to commonly used materials, Eastman Provista™ copolymer can often run on most standard processing equipment at increased speeds. An extremely high melt strength makes the resin an excellent choice when extruding profiles into complicated shapes. This product is certified to ANSI/NSF Standard 51.




기계적 특성값단위시험규격
ASTM 데이터
항복강도 50 MPa ASTM D 638
파단시 강도 29 MPa ASTM D 638
항복변형률 4 % ASTM D 638
파단시 신율 109 % ASTM D 638
굴곡 계수 2200 MPa ASTM D 790
굴곡 강도 72 MPa ASTM D 790
로크웰 경도 R 106 - ASTM D 785
아이조드 충격은 노치, 1/8 in 94 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 52 J/m ASTM D 256
온도 -40 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 67 °C ASTM D 648
DTUL @ 264 psi 62 °C ASTM D 648
비카트 연화 온도 79 °C ASTM D 1525
광학 특성값단위시험규격
ASTM 데이터
광택도 171 - ASTM D 2457
탁도 0.6 % ASTM D 1003
광선 투겠淅 90 % ASTM D 1003
기타 특성값단위시험규격
밀도 1270 kg/m³ ASTM D 792
Color b 0.61 - CIE
특징
생산 공정
외형 압출
특별 특성
가시광선 안정성, U.V. 안정성 또는 기후 안정성, 투명도
특성
High Gloss, Melt Strength, Copolymer
내화학성에
General Chemical Resistance
Certifications
Food contact, Food approval NSF 51
응용
포장
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.