Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX910C - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX910C:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL GTX910C resin is a non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). NORYL GTX910C resin exhibits excellent chemical resistance and is targeted for automotive applications such as exterior automotive applications such as wheel covers and wheel trim.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 19 cm³/10min ISO 1133
온도 280 °C -
하중 2.16 kg -
ASTM 데이터
용융 흐름성, MFI 15 g/10min ASTM D 1238
온도 280 °C -
하중 2.16 kg -
성형 수축률, 평행 0.0099 mm/mm ASTM D 955
성형 수축률, 수직 0.0103 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1960 MPa ISO 527
항복강도 50 MPa ISO 527
항복변형률 9 % ISO 527
파단시 강도 47 MPa ISO 527
파단시 신율 69 % ISO 527
굴곡 계수, 23°C 1540 MPa ISO 178
굴곡 강도 63 MPa ISO 178
챠피 노치드 충격 강도, +23°C 30 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 14 kJ/m² ISO 179/1eA
아이조드 충격은 노치, +23°C 50 kJ/m² ISO 180/1A
아이조드 충격은 노치 16 kJ/m² ISO 180/1A
온도 -30 °C -
ASTM 데이터
인장탄성률 1992 MPa ASTM D 638
항복강도 48 MPa ASTM D 638
파단시 강도 46 MPa ASTM D 638
항복변형률 22 % ASTM D 638
파단시 신율 63 % ASTM D 638
굴곡 계수 1530 MPa ASTM D 790
굴곡 강도 67 MPa ASTM D 790
아이조드 충격은 노치, 1/8 in 621 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 166 J/m ASTM D 256
온도 -30 °C -
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 75 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 159 °C ISO 75-1/-2
비카트 연화 온도, A 208 °C ISO 306
ASTM 데이터
열팽창 계수, 평행 86 E-6/K ASTM D 696
열팽창 계수, 수직 86 E-6/K ASTM D 696
DTUL @ 66 psi 158 °C ASTM D 648
DTUL @ 264 psi 86 °C ASTM D 648
비카트 연화 온도 172 °C ASTM D 1525
기타 특성값단위시험규격
물에서의 흡수성, 24hr 0.81 % ASTM D 570
밀도 1090 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 120 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
용융수지온도 280 - 305 °C -
성형온도 20 - 80 °C -
Zone 1 260 - 290 °C -
Zone 2 270 - 300 °C -
Zone 3 280 - 305 °C -
Nozzle temperature 280 - 305 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.4 - 0.6 MPa -
특징
생산 공정
사출 성형
내화학성에
General Chemical Resistance
응용
자동차의
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.