Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX820 - Americas - (PPE+PA*)-GF20 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX820 - Americas:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL GTX™ 820 resin is a 20% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade has high stiffness (flexural modulus 4000 MPa), excellent chemical resistance, and high heat resistance. NORYL GTX GTX830 resin is an excellent candidate for a wide variety of applications including valves for water management.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 7.1 cm³/10min ISO 1133
온도 280 °C -
하중 5 kg -
성형 수축률, 평행 0.3 % ISO 294-4, 2577
성형 수축률, 수직 0.9 % ISO 294-4, 2577
ASTM 데이터
용융 흐름성, MFI 7 g/10min ASTM D 1238
온도 280 °C -
하중 5 kg -
성형 수축률, 평행 0.27 mm/mm ASTM D 955
성형 수축률, 수직 0.93 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 6400 MPa ISO 527
파단시 강도 139 MPa ISO 527
파단시 신율 3.6 % ISO 527
굴곡 계수 5960 MPa ISO 178
챠피 충격 강도, +23°C 62 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 8.7 kJ/m² ISO 179/1eA
Izod impact strength, +23°C, 4mm 86 kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 4mm 8.8 kJ/m² ISO 180/1A
ASTM 데이터
인장탄성률 6350 MPa ASTM D 638
파단시 강도 133 MPa ASTM D 638
파단시 신율 3.6 % ASTM D 638
굴곡 계수 6030 MPa ASTM D 790
로크웰 경도 R 119 - ASTM D 785
아이조드 충격은 노치, 1/8 in 93 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 53 J/m ASTM D 256
온도 -30 °C -
Izod충격강도, 1/8 in 900 J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 211 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 248 °C ISO 75-1/-2
비카트 연화 온도, A 252 °C ISO 306
비카트 연화 온도, B 229 °C ISO 306
선형 열팽창 계수, 평행 27 E-6/K ISO 11359-1/-2
선형 열팽창 계수, 수직 78 E-6/K ISO 11359-1/-2
ASTM 데이터
비카트 연화 온도 231 °C ASTM D 1525
기타 특성값단위시험규격
물에서의 흡수성 1.88 % ISO 62와 유사
밀도 1250 kg/m³ ISO 1183
밀도 1240 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 95 - 105 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.07 % -
용융수지온도 280 - 305 °C -
성형온도 75 - 120 °C -
Zone 1 265 - 305 °C -
Zone 2 270 - 305 °C -
Zone 3 275 - 305 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 1.4 MPa -
특징
생산 공정
사출 성형
응용
자동차의
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.