Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX674PC - Americas - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Injection Molding - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

NORYL GTX™ 674PC resin is a conductive, non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is optimized to allow for in- or on-line primer-less powder coat painting around corners and holes with a Class A Surface. NORYL GTX674PC resin exhibits high heat resistance, improved surface appearance and is an excellent candidate for automotive applications such as mirror housings and brackets. This material is only available in black.

UL Yellow Card Link E121562-549484

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
용융 밀도	967	kg/m³	-
용융 열전도율	0.19	W/(m K)	-
용융 비열용량	3760	J/(kg K)	-
이형온도	156	°C	-
ASTM 데이터
용융 흐름성, MFI	25	g/10min	ASTM D 1238
온도	300	°C	-
하중	5	kg	-

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	2320	MPa	ISO 527
항복변형률	3	%	ISO 527
파단시 강도	60	MPa	ISO 527
파단시 신율	4	%	ISO 527
굴곡 계수	2480	MPa	ISO 178
ASTM 데이터
인장탄성률	2810	MPa	ASTM D 638
항복강도	65	MPa	ASTM D 638
파단시 강도	64	MPa	ASTM D 638
항복변형률	3	%	ASTM D 638
파단시 신율	4	%	ASTM D 638
굴곡 계수	2890	MPa	ASTM D 790
아이조드 충격은 노치, 1/8 in	74	J/m	ASTM D 256
아이조드 충격은 노치, Low-Temperature	50	J/m	ASTM D 256
온도	-30	°C	-

열적 특성	값	단위	시험규격
ISO 데이터
하중하에서의 변형온도, 0.45 MPa	185	°C	ISO 75-1/-2
비카트 연화 온도, B	197	°C	ISO 306
비카트 연화 온도, 120°C/h 50N	196	°C	ISO 306
선형 열팽창 계수, 평행	122	E-6/K	ISO 11359-1/-2
선형 열팽창 계수, 수직	134	E-6/K	ISO 11359-1/-2
1.5mm 평균두께에서의 난연성	HB	class	IEC 60695-11-10
테스트 두께	1.5	mm	-
ASTM 데이터
DTUL @ 66 psi	188	°C	ASTM D 648
비카트 연화 온도	197	°C	ASTM D 1525

기타 특성	값	단위	시험규격
밀도	1110	kg/m³	ISO 1183
밀도	1110	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	값	단위	시험규격
Pre-drying - Temperature	95 - 105	°C	-
Pre-drying - Time	3 - 4	h	-
Processing humidity	≤0.07	%	-
용융수지온도	280 - 305	°C	-
성형온도	75 - 120	°C	-
Zone 1	265 - 305	°C	-
Zone 2	270 - 305	°C	-
Zone 3	275 - 305	°C	-
Screw speed	20 - 100	rpm	-
Back pressure	0.3 - 1.4	MPa	-

도표

특징

생산 공정

사출 성형

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.