Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin GFN3 - Europe - (PPE+PS)-GF30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin GFN3 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL™ GFN3 resin is a 30% glass reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This general-purpose injection moldable grade exhibits very low moisture absorption, high strength, hydrolytic stability, Low warpage, low specific gravity, and dimensional stability. NORYL GFN3 carries a UL746C outdoor suitability rating of F2 and is an excellent candidate for a variety of indoor and outdoor applications including construction, electrical components + displays, lawn and garden equipment. *See NORYL GFN3F resin for FDA food compliant / NSF version.

UL Yellow Card Link E45329-236756
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 7 cm³/10min ISO 1133
온도 280 °C -
하중 10 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 8000 MPa ISO 527
파단시 강도 100 MPa ISO 527
파단시 신율 1.5 % ISO 527
굴곡 계수 6000 MPa ISO 178
챠피 충격 강도, +23°C 25 kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 25 kJ/m² ISO 179/1eU
Izod impact strength, +23°C, 4mm 25 kJ/m² ISO 180/1U
Izod impact strength, -30°C, 4mm 25 kJ/m² ISO 180/1U
Ball indentation hardness 130 MPa ISO 2039-1
열적 특성값단위시험규격
ISO 데이터
비카트 연화 온도, A 155 °C ISO 306
비카트 연화 온도, B 145 °C ISO 306
비카트 연화 온도, 120°C/h 50N 155 °C ISO 306
1.5mm 평균두께에서의 난연성 HB class IEC 60695-11-10
테스트 두께 1.5 mm -
열전도율 0.28 W/(m K) DIN 52616
Glow Wire Flammability Index (GWFI) 850 °C IEC 60695-2-12
GWFI - thickness tested (2) 3.2 mm -
전기적 특성값단위시험규격
ISO 데이터
상대 유전뮬, 1MHz 2.9 - IEC 62631-2-1
소산 인자, 1MHz 10 E-4 IEC 62631-2-1
부피 저항 1E13 Ohm*m IEC 62631-3-1
표면 저항 >1E15 Ohm IEC 62631-3-2
CTI 250 - IEC 60112
기타 특성값단위시험규격
물에서의 흡수성 0.2 % ISO 62와 유사
조건에서의 흡습성 0.06 % ISO 62와 유사
밀도 1300 kg/m³ ISO 1183
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 100 - 120 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
용융수지온도 280 - 300 °C -
성형온도 80 - 120 °C -
Feed temperature 60 - 80 °C -
Zone 1 250 - 270 °C -
Zone 2 270 - 290 °C -
Zone 3 290 - 310 °C -
특징
생산 공정
사출 성형
내화학성에
Hydrolytically Stable
Certifications
Food contact, Food approval FDA 21 CFR
응용
자동차의
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.