Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ PPE 6850H - Europe - PPE - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ PPE 6850H - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
제품 설명서
NORYL™ 6850H resin concentrate is an non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS). This material is in granule form and is optimized for blending with polystyrene resins. NORYL 6850H resin may be an excellent candidate in microwavable food packaging applications. This product is not certified per food contact regulations in US + EUR. Certification would be dependent on end-part testing.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 20 cm³/10min ISO 1133
온도 280 °C -
하중 5 kg -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2340 MPa ISO 527
항복강도 60 MPa ISO 527
항복변형률 5 % ISO 527
파단시 강도 18 MPa ISO 527
파단시 신율 50 % ISO 527
굴곡 계수 2380 MPa ISO 178
챠피 노치드 충격 강도, +23°C 11 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 9 kJ/m² ISO 179/1eA
아이조드 노치 충격 강도, +23°C, 4mm 10 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 8 kJ/m² ISO 180/1A
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 126 °C ISO 75-1/-2
비카트 연화 온도, B 141 °C ISO 306
비카트 연화 온도, 120°C/h 50N 147 °C ISO 306
기타 특성값단위시험규격
물에서의 흡수성 0.25 % ISO 62와 유사
조건에서의 흡습성 0.06 % ISO 62와 유사
밀도 1060 kg/m³ ISO 1183
특징
Certifications
Food contact
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.