Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Mosten® EH 501 - PP - ORLEN Unipetrol RPA s.r.o.

Material Data Center offers the following functions for Mosten® EH 501:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Mosten datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
용융 흐름성, MFI 0.5 g/10min ISO 1133
온도 230 °C -
负荷 2.16 kg -
성형 수축률, 평행 2.2 % ISO 294-4, 2577
성형 수축률, 수직 1.9 % ISO 294-4, 2577
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 1250 MPa ISO 527
항복강도 27 MPa ISO 527
항복변형률 9 % ISO 527
파단시 신율 >50 % ISO 527
굴곡 계수, 23°C 1300 MPa ISO 178
탄성변형률, 1h 950 MPa ISO 899-1
탄성변형률, 1000h 350 MPa ISO 899-1
챠피 노치드 충격 강도, +23°C 90 kJ/m² ISO 179/1eA
쇼어 D 경도 59 - ISO 7619-1
열적 특성값단위시험규격
ISO 데이터
녹는점, 10°C/min 168 °C ISO 11357-1/-3
하중하에서의 변형온도, 1.80 MPa 55 °C ISO 75-1/-2
특징
생산 공정
Pipe/Tube Extrusion, 외형 압출, 시트 압출, 기타 압출, 중공 성형
인도 유형
펠렛 (입자,알갱이), 자연 색상
특성
Nucleated, Copolymer
내화학성에
General Chemical Resistance
Certifications
Food contact, Food approval 1935/2004/EC
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.