Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Monprene® CP-17240 - TPE-X - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center
The Monprene CP-17200 Filled, High Flow Series of thermoplastic elastomer compounds, with good UV resistance, available in NAT or colors, from 40 to 80 Shore A, are designed specifically for EU consumer product applications requiring a soft, rubber-like feel. Monprene CP-17240 is a low hardness, high density grade that is suitable for injection molding.
Adheres to PP
Property | Value | Unit | Standard |
---|---|---|---|
Apparent Viscosity (200 °C, 206 1/s) | 109 | Pas | ASTM D3835 |
기계적 특성 | 값 | 단위 | 시험규격 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM 데이터 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
100% 변형시 탄성률 | 1 | MPa | ASTM D 412 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
300% 변형시 탄성률 | 0.5 | MPa | ASTM D 412 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
쇼어 A 경도 | 40 | - | ASTM D 2240 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
압축세트, 22 hr @ 73 °F | 20 | % | ASTM D 395 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
압축세트, 22 hr @ 158 °F | 38 | % | ASTM D 395 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
파단시 강도 | 7.2 | MPa | ASTM D 412 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
파단시 신율 | 900 | % | ASTM D 412 |
기타 특성 | 값 | 단위 | 시험규격 |
밀도 | 1050 | kg/m³ | ASTM D 792 |
Processing Recommendation Injection Molding | 값 | 단위 | 시험규격 |
Pre-drying - Temperature | 65 | °C | - |
Pre-drying - Time | 2 - 4 | h | - |
용융수지온도 | 180 - 230 | °C | - |
성형온도 | 15 - 50 | °C | - |
Zone 1 | 120 - 160 | °C | - |
Zone 2 | 160 - 230 | °C | - |
Zone 3 | 180 - 230 | °C | - |
Nozzle temperature | 180 - 230 | °C | - |
Screw speed | 50 - 100 | rpm | - |
Back pressure | 0.5 - 1.5 | MPa | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.