Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Melopas® MF 150 - MF-W - Raschig GmbH

Material Data Center offers the following functions for Melopas® MF 150:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Melopas datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics값단위시험규격
ISO 데이터
성형 수축률, 평행 1.1 % ISO 294-4, 2577
용융 열전도율 0.45 W/(m K) -
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 6500 MPa ISO 527
인장 강도 62.5 MPa ISO 527
굴곡 계수, 23°C 8500 MPa ISO 178
챠피 충격 강도, +23°C 8.5 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 1.65 kJ/m² ISO 179/1eA
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 168 °C ISO 75-1/-2
하중하에서의 변형온도, 8.00 MPa 120 °C ISO 75-1/-2
선형 열팽창 계수, 평행 25 E-6/K ISO 11359-1/-2
1.5mm 평균두께에서의 난연성 V-0 class IEC 60695-11-10
테스트 두께 1.5 mm -
두께가 h인 제품의 난연성 등급 5V 5VA class IEC 60695-11-20
테스트 두께 1.5 mm -
전기적 특성값단위시험규격
ISO 데이터
상대 유전율, 100Hz 13.5 - IEC 62631-2-1
상대 유전뮬, 1MHz 8 - IEC 62631-2-1
소산 인자, 100Hz 4000 E-4 IEC 62631-2-1
소산 인자, 1MHz 400 E-4 IEC 62631-2-1
부피 저항 1E10 Ohm*m IEC 62631-3-1
표면 저항 1E11 Ohm IEC 62631-3-2
전기 압력 17.5 kV/mm IEC 60243-1
CTI 600 - IEC 60112
ASTM 데이터
아크 저항 5 s ASTM D 495
기타 특성값단위시험규격
밀도 1600 kg/m³ ISO 1183
Bulk density 650 kg/m³ -
특징
생산 공정
사출 성형, Compression Molding
Certifications
Contains renewable resources
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.