Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ Copolymer EXL9111 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ Copolymer EXL9111 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성 - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
제품 설명서
LEXAN EXL9111 polycarbonate-Siloxane copolymer resin is a high flow, high impact,non-chlorinated, non-brominated flame retardant opaque injection molding (IM) grade.

UL Yellow Card Link E207780-103826700
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 20 g/10min ASTM D 1238
온도 300 °C -
하중 1.2 kg -
성형 수축률, 평행 0.6 mm/mm ASTM D 955
성형 수축률, 수직 0.62 mm/mm ASTM D 955
기계적 특성값단위시험규격
ISO 데이터
인장탄성률 2350 MPa ISO 527
항복강도 60 MPa ISO 527
항복변형률 4.5 % ISO 527
파단시 강도 47 MPa ISO 527
파단시 신율 46.7 % ISO 527
굴곡 계수 2310 MPa ISO 178
Izod impact strength, +23°C, 4mm N kJ/m² ISO 180/1U
아이조드 노치 충격 강도, +23°C, 4mm 51.3 kJ/m² ISO 180/1A
아이조드 노치 충격 강도, -30°C, 4mm 104 kJ/m² ISO 180/1A
ASTM 데이터
인장탄성률 2387 MPa ASTM D 638
항복강도 60 MPa ASTM D 638
파단시 강도 54 MPa ASTM D 638
항복변형률 4.6 % ASTM D 638
파단시 신율 76.4 % ASTM D 638
굴곡 계수 2440 MPa ASTM D 790
로크웰 경도 L92.2 - ASTM D 785
아이조드 충격은 노치, 1/8 in 753 J/m ASTM D 256
아이조드 충격은 노치, Low-Temperature 124 J/m ASTM D 256
온도 -30 °C -
Izod충격강도, 1/8 in N J/m ASTM D 256
열적 특성값단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 103 °C ISO 75-1/-2
하중하에서의 변형온도, 0.45 MPa 112 °C ISO 75-1/-2
비카트 연화 온도, B 117 °C ISO 306
비카트 연화 온도, 120°C/h 50N 119 °C ISO 306
두께 H인 제품의 난연성 V-1 class IEC 60695-11-10
테스트 두께 0.8 mm -
ASTM 데이터
DTUL @ 66 psi 111 °C ASTM D 648
DTUL @ 264 psi 101 °C ASTM D 648
비카트 연화 온도 126 °C ASTM D 1525
전기적 특성값단위시험규격
ASTM 데이터
표면 저항 >1E15 Ohm ASTM D 257
부피 저항 >1E15 Ohm*cm ASTM D 257
기타 특성값단위시험규격
조건에서의 흡습성 0.43 % ISO 62와 유사
밀도 1190 kg/m³ ASTM D 792
Processing Recommendation Injection Molding값단위시험규격
Pre-drying - Temperature 100 °C -
Pre-drying - Time 3 - 4 h -
Processing humidity ≤0.02 % -
용융수지온도 280 - 305 °C -
성형온도 60 - 80 °C -
Zone 1 260 - 285 °C -
Zone 2 275 - 295 °C -
Zone 3 280 - 305 °C -
특징
생산 공정
사출 성형
부가물
난연제
특별 특성
난연성
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.