Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Hylon® N1013HL - PA66-GF13 - Ravago Manufacturing Americas

Material Data Center offers the following functions for Hylon® N1013HL:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Hylon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 전기적 특성 - 기타 특성
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics건조/응축단위시험규격
ISO 데이터
성형 수축률, 평행 0.8 / * % ISO 294-4, 2577
ASTM 데이터
성형 수축률, 평행 0.0075 mm/mm ASTM D 955
기계적 특성건조/응축단위시험규격
ISO 데이터
항복강도 114 / - MPa ISO 527
파단시 신율 2.5 / - % ISO 527
굴곡 계수, 23°C 4730 / - MPa ISO 178
아이조드 충격은 노치, +23°C 3.1 / - kJ/m² ISO 180/1A
ASTM 데이터
항복강도 118 / 82.7 MPa ASTM D 638
파단시 신율 2.5 / 7 % ASTM D 638
굴곡 계수 5000 / 2760 MPa ASTM D 790
굴곡 강도 179 / 103 MPa ASTM D 790
로크웰 경도 M 95 / M 80 - ASTM D 785
아이조드 충격은 노치, 1/8 in 53 / 110 J/m ASTM D 256
열적 특성건조/응축단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 229 / * °C ISO 75-1/-2
ASTM 데이터
UL94 난연성 HB - UL 94
테스트 두께 1.5 mm -
열팽창 계수, 평행 27 E-6/K ASTM D 696
DTUL @ 264 psi 235 °C ASTM D 648
전기적 특성건조/응축단위시험규격
ASTM 데이터
전기 압력, 단기간의 20 / - kV/mm ASTM D 149
부피 저항 >1E15 / - Ohm*cm ASTM D 257
기타 특성건조/응축단위시험규격
밀도 1230 / - kg/m³ ISO 1183
물에서의 흡수성, 24hr 1 % ASTM D 570
밀도 1230 kg/m³ ASTM D 792
특징
생산 공정
사출 성형
인도 유형
펠렛 (입자,알갱이)
부가물
윤활제
특별 특성
열안정성
지역별 검색
쨘횕쩐횈쨍횧쨍짰횆짬
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.