Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Halene - H B6401 - (PE-HD) - Haldia Petrochemicals

Material Data Center offers the following functions for Halene - H B6401:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Halene datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - Processing Recommendation Extrusion
Any use of this information falls under the rules of our disclaimer.
제품 설명서
B6401 is a Blow Molding Grade HDPE produced by the Mitsui CX Process.

This resin is particularly recommended for upto 20-liter containers for Lubricants and Edible oils.

B6401 combines exceptional processability with high rigidity, excellent mechanical properties and impact resistance.
Processing/Physical Characteristics값단위시험규격
ASTM 데이터
용융 흐름성, MFI 0.4 g/10min ASTM D 1238
온도 190 °C -
하중 2.16 kg -
기계적 특성값단위시험규격
ASTM 데이터
항복강도 32 MPa ASTM D 638
파단시 강도 40 MPa ASTM D 638
파단시 신율 1000 % ASTM D 638
굴곡 계수 1350 MPa ASTM D 790
쇼어 D 경도 68 - ASTM D 2240
아이조드 충격은 노치, 1/8 in 300 J/m ASTM D 256
열적 특성값단위시험규격
ASTM 데이터
DTUL @ 66 psi 67 °C ASTM D 648
녹는점 135 °C ASTM D 3418
비카트 연화 온도 129 °C ASTM D 1525
기타 특성값단위시험규격
밀도 960 kg/m³ ASTM D 792
Processing Recommendation Extrusion값단위시험규격
용융수지온도 185 - 190 °C -
Zone 1 150 °C -
Zone 2 160 °C -
Zone 3 165 °C -
Zone 4 175 °C -
Nozzle temperature 180 - 185 °C -
특징
생산 공정
중공 성형
특별 특성
고충격 또는 고충격 보강
내화학성에
Oil Resistance
지역별 검색
쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.