Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Genestar™ G1301A-M61 - PA9T-I-GF30 - Kuraray Co., Ltd.

Check here, which other Genestar datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 기계적 특성 - 열적 특성 - 기타 특성 - 도표

Any use of this information falls under the rules of our disclaimer.

제품 설명서

Genestar G1301A-M61 Black is toughened 30%GF reinforced injection moulding grade.

The main features are:

• Performance at high temperatures
• Low water absorption and retention of its initial properties
• Ductility and impact strength

This grade is suitable for:

• Quick connector
• Structural parts in harsh chemical and thermal environments that require a certain ductility.

Processing/Physical Characteristics	값	단위	시험규격
ISO 데이터
성형 수축률, 평행	0.3	%	ISO 294-4, 2577
성형 수축률, 수직	0.9	%	ISO 294-4, 2577

기계적 특성	값	단위	시험규격
ISO 데이터
인장탄성률	8980	MPa	ISO 527
파단시 강도	175	MPa	ISO 527
파단시 신율	3	%	ISO 527
챠피 노치드 충격 강도, +23°C	17	kJ/m²	ISO 179/1eA

열적 특성	값	단위	시험규격
ISO 데이터
녹는점, 10°C/min	300	°C	ISO 11357-1/-3
유리 전이 온도, 10 °C/min	125	°C	ISO 11357-1/-2
하중하에서의 변형온도, 1.80 MPa	270	°C	ISO 75-1/-2
ASTM 데이터
열팽창 계수, 평행	20	E-6/K	ASTM D 696
열팽창 계수, 수직	46	E-6/K	ASTM D 696

기타 특성	값	단위	시험규격
물에서의 흡수성	0.19	%	ISO 62와 유사
밀도	1340	kg/m³	ISO 1183

도표

특징

생산 공정

사출 성형

인도 유형

검정

부가물

윤활제, 이형제

특별 특성

고충격 또는 고충격 보강, 열안정성

특성

Barrier Properties, Creep Resistance, Fatigue Resistance, High Crystallinity, Thermal Stability, Tribologic Grade, Weldable

내화학성에

Acid Resistance, Alkali Resistance, General Chemical Resistance, Environmental Stress Crack Resistance, Solvent Resistance, Grease Resistance, Hydrolytically Stable, Oil Resistance

응용

자동차의, 범용

지역별 검색

쨘횕쩐횈쨍횧쨍짰횆짬, 짱쨌쨈, 쩐횈쩍횄쩐횈 횇횂횈챵쩐챌 횁철쩔짧, 쨀짼쨘횓 쨔횞 횁횩쩐횙 쩐횈쨍횧쨍짰횆짬, 쨉쩔쩐챌 쨔횞 쩐횈횉횁쨍짰횆짬 짹횢쩔짧

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.