Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox. Information about Biopolymers, a project by FH Hannover and M-Base Engineering & Software GmbH sponsored by Fachagentur Nachwachsende Rohstoffe (FNR).

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Biomer® P226 - PHB - Biomer

Material Data Center offers the following functions for Biomer® P226:
unit conversion, PDF datasheet print, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Biomer datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics단위시험규격
ISO 데이터
용융 부피 - 흐름 속도, MVR 9.5 cm³/10min ISO 1133
온도 180 °C -
하중 5 kg -
용융 흐름성, MFI 10 g/10min ISO 1133
온도 180 °C -
负荷 5 kg -
성형 수축률, 평행 1.2 % ISO 294-4, 2577
기계적 특성단위시험규격
ISO 데이터
인장탄성률 1520 MPa ISO 527
인장 강도 25.5 MPa ISO 527
챠피 충격 강도, +23°C N kJ/m² ISO 179/1eU
챠피 충격 강도, -30°C 30 kJ/m² ISO 179/1eU
챠피 노치드 충격 강도, +23°C 2.7 kJ/m² ISO 179/1eA
챠피 노치드 충격 강도, -30°C 1.4 kJ/m² ISO 179/1eA
쇼어 D 경도 67 - ISO 7619-1
열적 특성단위시험규격
ISO 데이터
하중하에서의 변형온도, 1.80 MPa 59 °C ISO 75-1/-2
비카트 연화 온도, A 147 °C ISO 306
기타 특성단위시험규격
조건에서의 흡습성 0.4 % ISO 62와 유사
밀도 1250 kg/m³ ISO 1183
Processing Recommendation Injection Molding단위시험규격
Pre-drying - Temperature 60 °C -
Pre-drying - Time 2 h -
성형온도 30 - 55 °C -
특징
생산 공정
사출 성형, 기타 압출
인도 유형
펠렛 (입자,알갱이)
특성
High Crystallinity
Certifications
Contains renewable resources, Biodegradable
지역별 검색
짱쨌쨈
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.