Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin DH1004 - Americas - PEI - Saudi Basic Industries Corporation (SABIC)

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

High Temperature, Transparent, Polyetherimide Blend with Improved Ductility and Enhanced Hydrostability.

UL Yellow Card Link E121562-100737020

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	14	cm³/10min	ISO 1133
温度	360	°C	-
荷重	5	kg	-
溶融時の密度	1140	kg/m³	-
溶融時の熱伝導率	0.2	W/(m K)	-
溶融時の比熱	1730	J/(kg K)	-
突き出し時の時の温度	207	°C	-
ASTM数据
メルトフローレイト, MFI	10	g/10min	ASTM D 1238
温度	337	°C	-
荷重	6.6	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	3100	MPa	ISO 527
降伏応力	97	MPa	ISO 527
降伏ひずみ	7	%	ISO 527
破壊応力	80	MPa	ISO 527
破壊ひずみ	50	%	ISO 527
曲げ弾性率	2800	MPa	ISO 178
Izod impact strength, +23°C, 4mm	N	kJ/m²	ISO 180/1U
Izod impact strength, -30°C, 4mm	N	kJ/m²	ISO 180/1U
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm	6	kJ/m²	ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm	6	kJ/m²	ISO 180/1A
ASTM数据
引張弾性率	2900	MPa	ASTM D 638
降伏応力	95	MPa	ASTM D 638
破壊応力	90	MPa	ASTM D 638
降伏点伸び	7	%	ASTM D 638
破断伸び	85	%	ASTM D 638
曲げ弾性率	3000	MPa	ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in	70	J/m	ASTM D 256

熱的特性	値	単位	テスト基準
ISO データ
ビカット軟化温度, A	219	°C	ISO 306
ビカット軟化温度, B	212	°C	ISO 306
ビカット軟化温度, 120°C/h 50N	212	°C	ISO 306
線膨張係数, 平行	63	E-6/K	ISO 11359-1/-2
線膨張係数, 直角	63	E-6/K	ISO 11359-1/-2
厚さhでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	0.8	mm	-
ASTM数据
熱伝導率, ソリッド	0.0274	W/(m K)	ASTM C 177

その他の特性.	値	単位	テスト基準
密度.	1280	kg/m³	ISO 1183
密度	1280	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	150	°C	-
Pre-drying - Time	6 - 8	h	-
Processing humidity	≤0.02	%	-
樹脂温度	355 - 390	°C	-
金型温度	130 - 160	°C	-
Zone 1	330 - 390	°C	-
Zone 2	335 - 390	°C	-
Zone 3	345 - 390	°C	-
Screw speed	40 - 70	rpm	-
Back pressure	0.3 - 0.7	MPa	-

機能

特殊な特性

成形加工法.

射出成形.

特殊な特性.

透明.

領域別の利用可能性

北アメリカ.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.