Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of ULTEM™ Resin AUR202G6 - PEI-GD30 - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for ULTEM™ Resin AUR202G6:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ultem datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
30% Milled glass filled, enhanced flow Polyetherimide (Tg 217C). ECO Conforming, UL94 V0 and 5VA listing. ISCC+ certified renewable bio-based solutions are available for this grade via differentiated color nomenclature.

UL Yellow Card Link: E207780-104631586
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 10.1 g/10min ASTM D 1238
温度 337 °C -
荷重 6.6 kg -
成形収縮率., 平行 0.0035 mm/mm ASTM D 955
成形収縮率, 直角 0.005 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
ノッチ付きIzod衝撃強さ, +23°C 4.9 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 5231 MPa ASTM D 638
降伏応力 108 MPa ASTM D 638
破断伸び 4 % ASTM D 638
曲げ弾性率 5313 MPa ASTM D 790
曲げ強さ 173 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 32 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
線膨張係数, 平行 38 E-6/K ISO 11359-1/-2
線膨張係数, 直角 39 E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
Yellow Card 可用 はい - -
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 1.5 mm -
DTUL @ 264 psi 211 °C ASTM D 648
その他の特性.値単位テスト基準
吸水率, 24hr 0.18 % ASTM D 570
吸水率, 平衡 0.98 % ASTM D 570
密度 1510 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 150 °C -
Pre-drying - Time 4 - 6 h -
Processing humidity ≤0.02 % -
樹脂温度 350 - 400 °C -
金型温度 135 - 165 °C -
Zone 1 330 - 400 °C -
Zone 2 340 - 400 °C -
Zone 3 345 - 400 °C -
Nozzle temperature 345 - 400 °C -
Screw speed 40 - 70 rpm -
Back pressure 0.3 - 0.7 MPa -
特殊な特性
成形加工法.
射出成形.
特殊な特性.
難燃.
Certifications
ISCC Plus
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.