Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of TARFLON® AZ1900 - PC - Idemitsu Chemicals

Material Data Center offers the following functions for TARFLON® AZ1900:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Tarflon datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 18 g/10min ISO 1133
温度 300 °C -
荷重 1.2 kg -
成形収縮率, 平行 0.6 % ISO 294-4, 2577
機械的特性値単位テスト基準
ISO データ
引張弾性率 2000 MPa ISO 527
降伏応力 65 MPa ISO 527
破壊呼びひずみ >50 % ISO 527
破壊応力 65 MPa ISO 527
曲げ弾性率, 23°C 2300 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 80 kJ/m² ISO 179/1eA
ロックウェル硬度 R 120 - ISO 2039-2
ASTM数据
Taber耐摩耗性 12 mg/1000 cycles ASTM D 1044
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 125 °C ISO 75-1/-2
ビカット軟化温度, A 145 °C ISO 306
1.5mm厚さでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 1.5 mm -
ASTM数据
線膨張係数, 平行 65 E-6/K ASTM D 696
酸素指数 26 % ASTM D 2863
電気的特性.値単位テスト基準
ISO データ
比誘電率, 1MHz 2.85 - IEC 62631-2-1
誘電正接, 1MHz 92 E-4 IEC 62631-2-1
体積抵抗率 >1E13 Ohm*m IEC 62631-3-1
耐電圧 30 kV/mm IEC 60243-1
ASTM数据
耐アーク 110 s ASTM D 495
その他の特性.値単位テスト基準
密度. 1200 kg/m³ ISO 1183
特殊な特性
納入形状.
ペレット.
添加剤.
離型剤.
特殊な特性.
難燃.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.