Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LLDPE 118NJ - (PE-LLD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LLDPE 118NJ:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 熱的特性 - 光学特性 - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文
SABIC® LLDPE 118NJ is a butene linear low density polyethyleneresin typically used for general purpose applications. Films produced from this resin are tough with good puncture resistance, high tensile strength and good hot tack properties. 118NJ is TNPP free and it does not contain slip and antiblock additive.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 1 g/10min ASTM D 1238
温度 190 °C -
荷重 2.16 kg -
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, A 100 °C ISO 306
ASTM数据
ビカット軟化温度 100 °C ASTM D 1525
光学特性値単位テスト基準
ASTM数据
ヘイズ 13 % ASTM D 1003
機械的特性(ィルム)値単位テスト基準
ISO データ
引張弾性率, 平行 160 MPa ISO 527-3
引張弾性率, 直角 180 MPa ISO 527-3
降伏応力, normal 11 MPa ISO 527-3
破壊応力, 平行 37 MPa ISO 527-3
破壊応力, 直角 30 MPa ISO 527-3
トラウザー引裂抵抗, 平行 40 N/mm ISO 6383-1
トラウザー引裂抵抗, 直角 120 N/mm ISO 6383-1
ASTM Data
降伏応力, 平行 11 MPa ASTM D 882
降伏応力, 直角 12 MPa ASTM D 882
破壊応力, 平行 40 MPa ASTM D 882
破壊応力, 直角 32 MPa ASTM D 882
破断伸び, 平行 750 % ASTM D 882
破断伸び, 直角 800 % ASTM D 882
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.