Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® LDPE 1922N0 - (PE-LD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® LDPE 1922N0:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
機械的特性 - 熱的特性
Any use of this information falls under the rules of our disclaimer.
商品の説明文
SABIC® LDPE 1922N0 is an additive free LDPE grade produced by SABIC??s CTR® tubular technology. This grade is typically used for food contact applications that require high product quality, consistency and high level of purity. SABIC will offer for SABIC® LDPE 1922N0 the full food compliance service package. Application SABIC® LDPE 1922N0 is typically suitable for applications that require a good balance between flow properties and mechanical properties. This product is not intended for and must not be used in any pharmaceutical/medical applications.
機械的特性値単位テスト基準
ISO データ
引張弾性率 175 MPa ISO 527
降伏応力 8 MPa ISO 527
破壊応力 7 MPa ISO 527
破壊ひずみ >50 % ISO 527
引張クリープ弾性率, 1h 80 MPa ISO 899-1
引張クリープ弾性率, 1000h 45 MPa ISO 899-1
ノッチ付きIzod衝撃強さ 5 kJ/m² ISO 180/1A
ショア硬さD 40 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 39 °C ISO 75-1/-2
ビカット軟化温度, A 83 °C ISO 306
特殊な特性
Certifications
Food contact
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.