Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of SABIC® HDPE FI1157 - (PE-HD) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for SABIC® HDPE FI1157:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 機械的特性(ィルム)
Any use of this information falls under the rules of our disclaimer.
商品の説明文
SABIC® HDPE FI1157 is a High Density Polyethylene copolymer grade typically used for blown film applications. It has high molecular weight, broad molecular weight distribution and high density to produce film with low gels level, high stiffness, high melt strength, high impact resistance and with narrow gauge tolerances at low film thickness. SABIC® HDPE FI1157 can be processed at high throughput with good bubble stability. The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 0.35 g/10min ISO 1133
温度 190 °C -
荷重 5 kg -
機械的特性値単位テスト基準
ISO データ
ショア硬さD 62 - ISO 7619-1
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 75 °C ISO 306
機械的特性(ィルム)値単位テスト基準
ISO データ
破壊応力, 平行 50 MPa ISO 527-3
破壊応力, 直角 45 MPa ISO 527-3
エルメンドルフ引裂抵抗, 平行 0.2 N ISO 6383-2
エルメンドルフ引裂抵抗, 直角 0.45 N ISO 6383-2
特殊な特性
な特性
Copolymer
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.