Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NH6020 - Europe - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Check here, which other Sabic datasheets, application examples or technical articles are available in Material Data Center

Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding - 機能

Any use of this information falls under the rules of our disclaimer.

商品の説明文

NORYL™ NH6020 resin is a non-reinforced blend of polyphenylene ether (PPE) + high impact polystyrene (HIPS) designed for high heat resistance and thin-wall FR performance. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries a UL94 flame rating of 5VA at 2.5mm and V0 at 0.75mm along with UL746C Outdoor Suitability rating of F1 and RTI of 110C. NORYL NH6020 resin passes VDE/DIN 475 part 815 testing, Ball Pressure Test (BPT) at 125C, GWFI 960C at 1, 2, 3mm, GWIT 825C at 1mm, and CTI >600V making this an excellent candidate for unattended appliance components where EN/IEC 60335 applies.

UL Yellow Card Link E45329-100158888

Processing/Physical Characteristics	値	単位	テスト基準
ISO データ
メルトボリュームレイト, MVR	11	cm³/10min	ISO 1133
温度	280	°C	-
荷重	5	kg	-
溶融時の密度	1050	kg/m³	-
溶融時の熱伝導率	0.18	W/(m K)	-
溶融時の比熱	2010	J/(kg K)	-
突き出し時の時の温度	138	°C	-
ASTM数据
メルトフローレイト, MFI	13.5	g/10min	ASTM D 1238
温度	280	°C	-
荷重	5	kg	-

機械的特性	値	単位	テスト基準
ISO データ
引張弾性率	2740	MPa	ISO 527
降伏応力	77	MPa	ISO 527
降伏ひずみ	4.6	%	ISO 527
破壊応力	56	MPa	ISO 527
破壊ひずみ	4.2	%	ISO 527
曲げ弾性率	2680	MPa	ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C	9	kJ/m²	ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm	8	kJ/m²	ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm	5	kJ/m²	ISO 180/1A
ASTM数据
引張弾性率	2740	MPa	ASTM D 638
降伏応力	78	MPa	ASTM D 638
破壊応力	67	MPa	ASTM D 638
降伏点伸び	4.6	%	ASTM D 638
破断伸び	6.1	%	ASTM D 638
曲げ弾性率	3020	MPa	ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in	49	J/m	ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature	36	J/m	ASTM D 256
温度	-30	°C	-

熱的特性	値	単位	テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa	124	°C	ISO 75-1/-2
ビカット軟化温度, B	141	°C	ISO 306
ビカット軟化温度, 120°C/h 50N	151	°C	ISO 306
厚さhでの燃焼性	V-0	class	IEC 60695-11-10
試験片の厚さ	0.8	mm	-
厚さhでの燃焼性 5V	5VA	class	IEC 60695-11-20
試験片の厚さ	2.5	mm	-
グローワイヤ燃焼性指数 (GWFI)	960	°C	IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI)	960	°C	IEC 60695-2-12
グローワイヤ燃焼性指数 (GWFI)	960	°C	IEC 60695-2-12
グローワイヤ着火温度 (GWIT)	825	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	1	mm	-
グローワイヤ着火温度 (GWIT)	800	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	2	mm	-
グローワイヤ着火温度 (GWIT)	800	°C	IEC 60695-2-13
GWIT - 試験片の厚さ	3	mm	-
ASTM数据
DTUL @ 264 psi	125	°C	ASTM D 648
ビカット軟化温度	150	°C	ASTM D 1525

電気的特性.	値	単位	テスト基準
ISO データ
誘電正接, 1MHz	29	E-4	IEC 62631-2-1
体積抵抗率	>1E13	Ohm*m	IEC 62631-3-1
耐トラッキング性	600	-	IEC 60112

その他の特性.	値	単位	テスト基準
吸水率.	0.18	%	Sim. to ISO 62
吸湿率	0.06	%	Sim. to ISO 62
密度.	1140	kg/m³	ISO 1183
密度	1140	kg/m³	ASTM D 792

Processing Recommendation Injection Molding	値	単位	テスト基準
Pre-drying - Temperature	110 - 120	°C	-
Pre-drying - Time	2 - 3	h	-
樹脂温度	300 - 320	°C	-
金型温度	100 - 130	°C	-
Feed temperature	80 - 100	°C	-
Zone 1	260 - 280	°C	-
Zone 2	280 - 300	°C	-
Zone 3	300 - 320	°C	-

機能

特殊な特性

成形加工法.

射出成形.

添加剤.

難燃剤.

特殊な特性.

難燃.

領域別の利用可能性

ヨーロッパ.

Disclaimer

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.