Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Rilsan® MB 3000 NAT - PA11 FR... - ARKEMA

Material Data Center offers the following functions for Rilsan® MB 3000 NAT:
unit conversion, PDF datasheet print, comparison with other plastics, parameters for material models, CAE Interfaces

Check here, which other Rilsan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
商品の説明文
PA11, MHLF, 12-020, MD
Rilsan® MB 3000 NAT resin is a polyamide 11 produced from a renewable source. This natural grade is designed for injection molding and is classified as Halogen Free Flame Retardant (HFFR).



Main applications:
  • Wire and cable sheathing
  • Elevator doors rollers

Packaging:
This grade is delivered dried in sealed packaging (25 kg bags) ready to be processed.

Shelf Life:
Two years from the delivery. For any use above this limit, please refer to our technical services.
Processing/Physical Characteristics乾燥/調湿単位テスト基準
ISO データ
メルトボリュームレイト, MVR 95 / * cm³/10min ISO 1133
温度 235 / * °C -
荷重 2.16 / * kg -
成形収縮率, 平行 1.0 / * % ISO 294-4, 2577
成形収縮率, 直角 1.1 / * % ISO 294-4, 2577
機械的特性乾燥/調湿単位テスト基準
ISO データ
引張弾性率 - / 1830 MPa ISO 527
降伏応力 45 / 45 MPa ISO 527
降伏ひずみ 5 / 5 % ISO 527
破壊呼びひずみ >50 / >50 % ISO 527
シャルピー衝撃強さ, +23°C - / 83 kJ/m² ISO 179/1eU
シャルピー衝撃強さ, -30°C - / 38 kJ/m² ISO 179/1eU
ノッチ付きシャルピー衝撃強さ, +23°C - / 4 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30°C - / 3 kJ/m² ISO 179/1eA
ショア硬さD 69 / * - ISO 7619-1
熱的特性乾燥/調湿単位テスト基準
ISO データ
溶融温度, 10°C/min 189 / * °C ISO 11357-1/-3
線膨張係数, 平行 102 / * E-6/K ISO 11359-1/-2
1.5mm厚さでの燃焼性 V-0 / * class IEC 60695-11-10
試験片の厚さ 1.6 / * mm -
Yellow Card 可用 はい / * - -
厚さhでの燃焼性 V-0 / * class IEC 60695-11-10
試験片の厚さ 0.8 / * mm -
Yellow Card 可用 はい / * - -
酸素指数 33 / * % ISO 4589-1/-2
電気的特性.乾燥/調湿単位テスト基準
ISO データ
比誘電率, 100Hz 3 / - - IEC 62631-2-1
比誘電率, 1MHz 3 / - - IEC 62631-2-1
誘電正接, 100Hz 221 / - E-4 IEC 62631-2-1
誘電正接, 1MHz 180 / - E-4 IEC 62631-2-1
体積抵抗率 >1E13 / >1E13 Ohm*m IEC 62631-3-1
表面抵抗率 * / >1E15 Ohm IEC 62631-3-2
耐電圧 28 / 28 kV/mm IEC 60243-1
耐トラッキング性 * / 600 - IEC 60112
その他の特性.乾燥/調湿単位テスト基準
吸水率 2 / * % Sim. to ISO 62
吸湿率 0.6 / * % Sim. to ISO 62
密度 1090 / 1090 kg/m³ ISO 1183
Biobased content 90 % -
機能
 粘度せん断速度. , Rilsan® MB 3000 NAT, PA11 FR..., ARKEMA
 せん断応力-せん断速度. , Rilsan® MB 3000 NAT, PA11 FR..., ARKEMA
 せん断弾性率-温度. , Rilsan® MB 3000 NAT (乾燥), PA11 FR..., ARKEMA
 応力-ひずみ. , Rilsan® MB 3000 NAT (乾燥), PA11 FR..., ARKEMA
 割線弾性率−ひずみ. , Rilsan® MB 3000 NAT (乾燥), PA11 FR..., ARKEMA
特殊な特性
成形加工法.
射出成形.
納入形状.
ペレット., ナチュラルカラー
添加剤.
滑剤.
特殊な特性.
難燃., 光安定化., 紫外線安定化., 熱安定化.
Certifications
Contains renewable resources
領域別の利用可能性
その他の情報
村遜速揃

Processing conditions:

- Typical melt temperature (Min / Recommended / Max) : 210°C / 220°C / 230°C.
- Mold temperature : 20 - 60°C

- Drying time and temperature (only necessary for bags opened for more than two hours) : 4-6 hours at 80-90°C.

Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.