Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of RTP 6091-70A BLACK - TPE - RTP Company

Material Data Center offers the following functions for RTP 6091-70A BLACK:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other RTP datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Any use of this information falls under the rules of our disclaimer.
機械的特性単位テスト基準
ASTM数据
伸び率100%弾性率 2.76 MPa ASTM D 412
ショア硬さD 72 - ASTM D 2240
引裂強さ 19.3 kN/m ASTM D 624
圧縮永久ひずみ, 22 hr @ 158 °F 44 % ASTM D 395
破壊応力 4.72 MPa ASTM D 412
破断伸び 340 % ASTM D 412
熱的特性単位テスト基準
ASTM数据
UL94 燃焼性 HB - UL 94
追加試験片の厚さ 1.12 mm -
その他の特性.単位テスト基準
密度 940 kg/m³ ASTM D 792
Moisture Content 0.08 % -
Processing Recommendation Injection Molding単位テスト基準
Pre-drying - Temperature 82.2 °C -
Pre-drying - Time 4 h -
樹脂温度 263 - 282 °C -
金型温度 35 - 71.1 °C -
特殊な特性
成形加工法.
射出成形.
納入形状.
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.