Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL™ Resin NHP7020T3 - (PPE+PS) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL™ Resin NHP7020T3:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
NORYL NHP7020T3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for ultra-thin-wall FR. This injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries UL94 flame rating of V0 at 0.3mm. NORYL NHP7020T3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery modules, bus bar insulation layer and other high voltage electric component. See NHP8010VT3 resin for higher heat version.

UL Yellow Card Link: E207780-104613766
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 26 g/10min ASTM D 1238
温度 300 °C -
荷重 5 kg -
成形収縮率., 平行 0.0075 mm/mm ASTM D 955
成形収縮率, 直角 0.0086 mm/mm ASTM D 955
機械的特性値単位テスト基準
ISO データ
引張弾性率 2250 MPa ISO 527
降伏応力 64 MPa ISO 527
降伏ひずみ 5.3 % ISO 527
破壊応力 52 MPa ISO 527
破壊ひずみ 27 % ISO 527
曲げ弾性率, 23°C 2340 MPa ISO 178
曲げ強さ 98 MPa ISO 178
アイゾット衝撃試験, +23°C 104 kJ/m² ISO 180/1U
ノッチ付きIzod衝撃強さ, +23°C 37.5 kJ/m² ISO 180/1A
ノッチ付きIzod衝撃強さ 11.4 kJ/m² ISO 180/1A
温度 -30 °C -
ASTM数据
引張弾性率 2191 MPa ASTM D 638
降伏応力 61 MPa ASTM D 638
破壊応力 48 MPa ASTM D 638
降伏点伸び 5.5 % ASTM D 638
破断伸び 20 % ASTM D 638
曲げ弾性率 2220 MPa ASTM D 790
曲げ強さ 97 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 383 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 101 J/m ASTM D 256
温度 -30 °C -
アイゾット衝撃試験, 1/8 in 2150 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
荷重たわみ温度, 1.80 MPa 125 °C ISO 75-1/-2
荷重たわみ温度, 0.45 MPa 144 °C ISO 75-1/-2
厚さhでの燃焼性 V-0 class IEC 60695-11-10
試験片の厚さ 0.3 mm -
Yellow Card 可用 はい - -
ASTM数据
UL94 燃焼性 V-0 - UL 94
追加試験片の厚さ 0.3 mm -
DTUL @ 66 psi 145 °C ASTM D 648
DTUL @ 264 psi 128 °C ASTM D 648
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 7.6E16 Ohm ASTM D 257
体積抵抗率 2.2E16 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
密度. 1090 kg/m³ ISO 1183
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 100 - 120 °C -
Pre-drying - Time 3 - 5 h -
樹脂温度 280 - 320 °C -
金型温度 75 - 130 °C -
Zone 1 280 - 320 °C -
Zone 2 280 - 320 °C -
Zone 3 280 - 320 °C -
Nozzle temperature 250 - 320 °C -
Screw speed 20 - 100 rpm -
Back pressure 0.3 - 0.8 MPa -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
難燃., Halogen-free, 高耐衝撃及び耐衝撃改良., 熱安定化.
耐薬品性
Hydrolytically Stable
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., ヨーロッパ., アジア/太平洋地域., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.