Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
This is the free Material Data Center Datasheet of Monprene® RG-10130 - TPE - Teknor Apex Co.
unit conversion, PDF datasheet print, comparison with other plastics
Check here, which other Monprene datasheets, application examples or technical articles are available in Material Data Center
The Monprene RG-10100 series is a group of high performance thermoplastic elastomers specifically designed for regulated applications including food contact, toys, and children's products. Monprene RG-10130 is a low density, low hardness grade that complies with various US FDA and European regulations and directives for food contact and toy safety and is suitable for injection molding.
Adheres to PP
Property | Value | Unit | Standard |
---|---|---|---|
Tensile Stress at 100% (across flow) | 0.48 | MPa | ISO 37 |
Tensile Stress at Break (across flow) | 4.2 | MPa | ISO 37 |
Tensile Strain at Break (across flow) | 860 | % | ISO 37 |
Tear Strength (across flow) | 6.2 | kN/m | ISO 34-1 |
Apparent Viscosity (200 °C, 206 1/s) | 204 | Pas | ASTM D3835 |
Processing/Physical Characteristics | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ASTM数据 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
メルトフローレイト, MFI | 1.5 | g/10min | ASTM D 1238 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
温度 | 200 | °C | - | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
荷重 | 5 | kg | - |
機械的特性 | 値 | 単位 | テスト基準 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISO データ | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
圧縮永久ひずみ 70℃, 24h | 20 | % | ISO 815 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
引裂強さ | 12 | kN/m | ISO 34-1 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ショア硬さA | 29 | - | ISO 7619-1 |
その他の特性. | 値 | 単位 | テスト基準 |
密度 | 888 | kg/m³ | ASTM D 792 |
Processing Recommendation Injection Molding | 値 | 単位 | テスト基準 |
Pre-drying - Temperature | 65 | °C | - |
Pre-drying - Time | 2 - 4 | h | - |
樹脂温度 | 182 - 227 | °C | - |
金型温度 | 27 - 49 | °C | - |
Zone 1 | 160 - 177 | °C | - |
Zone 2 | 182 - 204 | °C | - |
Zone 3 | 182 - 216 | °C | - |
Nozzle temperature | 182 - 227 | °C | - |
Screw speed | 50 - 100 | rpm | - |
Back pressure | 0.172 - 0.689 | MPa | - |
Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.
Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.