Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ VISUALFX™ Resin FXE121R Americas - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ VISUALFX™ Resin FXE121R Americas:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性.
Any use of this information falls under the rules of our disclaimer.
商品の説明文
Transparent PC.  ILLUMINATE special effects (fluorescent/edge glow colors).  MFR 18.2.  Internal mold release.
Processing/Physical Characteristics値単位テスト基準
ASTM数据
メルトフローレイト, MFI 18.2 g/10min ASTM D 1238
温度 300 °C -
荷重 1.2 kg -
機械的特性値単位テスト基準
ASTM数据
引張弾性率 2170 MPa ASTM D 638
降伏応力 62 MPa ASTM D 638
破壊応力 68 MPa ASTM D 638
降伏点伸び 7 % ASTM D 638
破断伸び 125 % ASTM D 638
曲げ弾性率 2340 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 747 J/m ASTM D 256
アイゾット衝撃試験, 1/8 in 3200 J/m ASTM D 256
熱的特性値単位テスト基準
ISO データ
厚さhでの燃焼性 HB class IEC 60695-11-10
試験片の厚さ 0.7 mm -
Yellow Card 可用 はい - -
ASTM数据
DTUL @ 66 psi 137 °C ASTM D 648
DTUL @ 264 psi 126 °C ASTM D 648
ビカット軟化温度 154 °C ASTM D 1525
電気的特性.値単位テスト基準
ISO データ
耐トラッキング性 325 - IEC 60112
その他の特性.値単位テスト基準
密度 1200 kg/m³ ASTM D 792
特殊な特性
成形加工法.
射出成形.
添加剤.
離型剤.
特殊な特性.
透明.
アプリケーション
自動車, 電気電子
領域別の利用可能性
北アメリカ., 南・中央アメリカ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.