Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of LEXAN™ FR Resin BX7241 - Asia - PC - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for LEXAN™ FR Resin BX7241 - Asia:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Lexan datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - 電気的特性. - その他の特性. - Processing Recommendation Injection Molding
Any use of this information falls under the rules of our disclaimer.
商品の説明文
LEXAN BX7241 Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled flame retardant grade that has good impact and processability. It has an MVR of 18 (260°C/2.16kg), UL94 V0@0.6mm, 5VA at 3.0mm rating and can be ideal for thin wall applications.

UL Yellow Card Link E207780-1020
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトボリュームレイト, MVR 18 cm³/10min ISO 1133
温度 260 °C -
荷重 2.16 kg -
ASTM数据
メルトフローレイト, MFI 18 g/10min ASTM D 1238
温度 260 °C -
荷重 2.16 kg -
機械的特性値単位テスト基準
ISO データ
引張弾性率 2500 MPa ISO 527
降伏応力 62 MPa ISO 527
降伏ひずみ 4.2 % ISO 527
破壊応力 45 MPa ISO 527
破壊ひずみ 50 % ISO 527
曲げ弾性率 2600 MPa ISO 178
ノッチ付きシャルピー衝撃強さ, +23°C 37 kJ/m² ISO 179/1eA
ノッチ付きシャルピー衝撃強さ, -30ﾟC 11 kJ/m² ISO 179/1eA
ノッチ付きアイゾット衝撃強さ, +23°C, 4mm 28 kJ/m² ISO 180/1A
ノッチ付きアイゾット衝撃強さ, -30°C, 4mm 11 kJ/m² ISO 180/1A
ASTM数据
引張弾性率 2500 MPa ASTM D 638
降伏応力 67 MPa ASTM D 638
破壊応力 65 MPa ASTM D 638
降伏点伸び 4.4 % ASTM D 638
破断伸び 100 % ASTM D 638
曲げ弾性率 2450 MPa ASTM D 790
ノッチ付きIzod衝撃強さ, 1/8 in 690 J/m ASTM D 256
ノッチ付きIzod衝撃強さ, Low-Temperature 190 J/m ASTM D 256
温度 -30 °C -
熱的特性値単位テスト基準
ISO データ
ビカット軟化温度, B 109 °C ISO 306
ビカット軟化温度, 120°C/h 50N 112 °C ISO 306
厚さhでの燃焼性 V-2 class IEC 60695-11-10
試験片の厚さ 0.2 mm -
グローワイヤ燃焼性指数 (GWFI) 960 °C IEC 60695-2-12
GWFI - 試験片の厚さ 0.75 mm -
グローワイヤ着火温度 (GWIT) 800 °C IEC 60695-2-13
GWIT - 試験片の厚さ 1 mm -
グローワイヤ着火温度 (GWIT) 825 °C IEC 60695-2-13
GWIT - 試験片の厚さ 3 mm -
ASTM数据
DTUL @ 66 psi 103 °C ASTM D 648
DTUL @ 264 psi 93 °C ASTM D 648
ビカット軟化温度 111 °C ASTM D 1525
電気的特性.値単位テスト基準
ASTM数据
表面抵抗率 >1E15 Ohm ASTM D 257
体積抵抗率 >1E15 Ohm*cm ASTM D 257
その他の特性.値単位テスト基準
吸水率. 0.2 % Sim. to ISO 62
吸湿率 0.1 % Sim. to ISO 62
密度 1200 kg/m³ ASTM D 792
Processing Recommendation Injection Molding値単位テスト基準
Pre-drying - Temperature 80 - 90 °C -
Pre-drying - Time 2 - 4 h -
Processing humidity ≤0.02 % -
樹脂温度 250 - 300 °C -
金型温度 60 - 85 °C -
Feed temperature 60 - 80 °C -
Zone 1 230 - 280 °C -
Zone 2 240 - 290 °C -
Zone 3 250 - 300 °C -
特殊な特性
成形加工法.
射出成形.
添加剤.
難燃剤.
特殊な特性.
難燃.
領域別の利用可能性
アジア/太平洋地域.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.